SPROUT Qi2 Wireless Car Charger User Manual
- July 3, 2024
- Sprout
Table of Contents
SPROUT Qi2 Wireless Car Charger
Specifications
- Input: Type-C PD: 5V3A, 9V2.22A 20W
- Output: 15W Max
- Wireless Charging Frequency: 110-205KHz, 128kHz / 360kHz
- Operation Humidity: 10% ~ 90% RH
- Magnetic Force: 7.6 ~ 14N
- Over Voltage Protection: Yes
- Under Voltage Protection: Yes
- Size: QI 2 WIRELESS CAR CHARGER
Product Usage Instructions
Operation Procedures
- Connect the wireless charger to the power adapter, and connect the power adapter to the power supply.
- Place your device (which supports wireless charging) on the wireless charger.
- Please take out the device after it is fully charged.
Operation Notes
- For optimum performance, please use the wireless charger according to this user manual.
- Please connect the wireless charger to the power adapter with output of 5V3A, 9V2.22A. It is also compatible with PD protocol.
- Please unplug the wireless charger after using.
- Do not use the wireless charger with an electronic product which is not in conformity with the specifications to avoid any problems caused by specification mismatching.
- It’s normal that the wireless charger will be a little overheated during use.
FAQ
-
Q: What devices are compatible with the wireless car charger?
A: The charger is compatible with mobile phones and other devices that support wireless charging, such as iPhone 12 series, iPhone 13 series, iPhone 14 series, iPhone 15 series, and other mobile phones compatible with QI protocol. -
Q: What should I do if the ireless charger stops working?
A: If the wireless charger stops working, check whether your device is compatible with the charger. If issues persist, contact the store or distributor in your area for assistance. -
Q: Is it safe to place metal objects on the back of the phone while it is wirelessly charging?
A: It is not recommended to place metal objects on the back of the phone while it is wirelessly charging as it may interfere with the charging process.
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before using this product. Please
keep this manual for reference in the future.
INTRODUCTION
This product is a wireless charging device in accordance with the QI protocol which is suitable for mobile phones, and other devices based on wireless charging 5W or 15W. Connect the wireless charger to a power supply and then you can charge your device which is supported wireless charging (mobile phones, etc.) by putting it on the wireless charger directly.
FEATURES
- Port input: Type-C PD: 5V3A, 9V2.22A 20W
- Transmitting terminal output: 5W/15W
- It is light, smart and convenient to use
- Compatibility: iPhone 12 series, iPhone 13 series, iPhone 14 series, iPhone 15 series and other mobile phones compatible with QI protocol
SPECIFICATIONS
| Input | Type-C PD: 5V3A, 9V2.22A 20W |
|---|---|
| Output | 15W Max |
| Wireless Charging Frequency | 110-205KHz, 128kHz / 360kHz |
| Operation Temperature Range | 0 ~ 35°C |
| Operation Humidity | 10% ~ 90%RH |
| Magnetic Force | 7.6 ~ 14N |
| Over Voltage Protection | Yes |
| Under Voltage Protection | Yes |
| Size | 59.8 × 70.5 × 91.4mm |
| User Manual | English Version |
PACKING LIST
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Main unit×1
- User Manual×1
OPERATION
Operation Procedures
- Connect the wireless charger to the power adapter, and connect the power adapter to the power supply.
- Place your device (which supports wireless charging) on the wireless charger.
- Please take out the device after it is fully charged.
Operation Notes
- For optimum performance, please use the wireless charger according to this user manual.
- Please connect the wireless charger to the power adapter which the output should be 5V3A, 9V2.22A. It is also compatible with PD protocol.
- Please unplug the wireless charger after using.
- Do not use the wireless charger with an electronic product which is not in conformity with the specifications, so as to avoid any problems caused by specification mismatching.
- It’s normal that wireless charger will be a little overheated in the use process.
- When the wireless charger stops working under some accidents, you need to check whether the device is compatible with this charger.
- Do not let the wireless charger close to fire, such as stove, candles and etc.
- Do not let the wireless charger soak into liquid, such as swimming pool, bathtub, etc.
- Do not wash the wireless charger with corrosive cleaner.
- If the wireless charger cannot work properly, please contact the store or distributor in your area.
- Do not place metal objects on the back of the phone while it is charging wirelessly.
CONNECTION DIAGRAM
FCC Warning
This device complies with Part 18 of the FCC Rules.
NOTE : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:
Max. Electric Field Emissions: 6.17V/m
Max. Magnetic Field Emissions: 0.45A/m
- The maintenance of the system is the responsibility of the manufacturer.
- To prevent interference, the product should be as far away from devices operating at the same frequency as possible.
RF exposure considerations
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>