sprout MakerWall Storage Hammock User Manual
- June 12, 2024
- Sprout
Table of Contents
sprout MakerWall Storage Hammock
Product Information
The product is a MakerWall Storage Hammock, designed for simple and modern storage solutions. It is made in America by Quark Enterprises, LLC. The model number is MKA-HAMMOCK.
Product Usage Instructions
- Start by assembling the parts of the hammock:
- Left Bracket (A)
- Right Bracket (B)
- (2) Braces (C)
- 9×20 Net (D)
- Take Brace Cc and insert its tabs into the slots on Left Bracket Aa. Ensure that the tabs are oriented with the groove towards the notch.
- Tighten slightly by pushing down on the large end of Brace Cc. The final tightening will be done in Step 4.
- Repeat Steps 1 and 2 with the other Brace Cc and the Right Bracket bB.
- Press the bracket tips inward to tighten the braces completely.
- Put the corners of Net Dd over the back tabs of the Brackets.
- Pull the other corners of Net dD over the front tabs of the Brackets and straighten the Brackets as needed.
- Ensure that the hammock is fully assembled before use.
- Wash the net with mild detergent when necessary.
Please note that adult assembly is required, and if you need any assistance or
have any questions, you can contact our customer service agent at +1
833-530-0033. For more information,
visit our website at www.sprout-kids.com.
© COPYRIGHT QUARK ENTERPRISES 2022 | DOCUMENT: AI-MKA-HAMMOCK | QUARK
ENTERPRISES, LLC PO BOX 1123, PROVO, UT 84601
PARTS
ASSEMBLY INSTRUCTIONS
- Put tabs on Brace c into slots on Left Bracket a . Tabs must be oriented with groove towards the notch, as shown.
- Tighten slightly by pushing down on the large end of the Brace c . Will Fnish tightening in Step 4.
- Repeat Steps 1 & 2 with the other Brace c and the Right Bracket b .
- Insert the (2) Brackets into the Slotboard with the Braces facing inward.
- Press the bracket tips inward to tighten braces completely.
- Put corners of Net d over back tabs of Brackets.
- Pull other corners of Net d over front tabs of Brackets, then straighten Brackets as needed.
MakerWall Storage Hammock
- Adult assembly only
- Assemble completely before use
- Wash net with mild detergent
STOP
- Frustrated?
- Need Help?
Talk to our customer service agent at +1
833-530-0033
QUARK ENTERPRISES, LLC PO BOX 1123, PROVO, UT 84601 MODEL NO. MKA-HAMMOCK
DOCUMENT: AI-MKA-HAMMOCK WWW.SPROUT-KIDS.COM
COPYRIGHT QUARK ENTERPRISES 2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>