SPROUT EXSP0145 Magnetic Car Mount Instruction Manual

May 15, 2024
Sprout

SPROUT EXSP0145 Magnetic Car Mount

SPROUT EXSP0145 Magnetic Car Mount

Important Information

WE PUT MORE INTO OUR TECH, SO YOU CAN GET MORE OUT OF LIFE.
At Sprout, our purpose is to help you unlock the potential of your technology. We’re an Australian brand, and we design all of our products locally to ensure they are uniquely suited to your lifestyle.

Other Modals

WHAT’S IN THE BOX

Thank you for choosing the Magnetic Car Mount by Sprout.
For optimum performance and safety, please read instructions carefully before usage.
Please keep this manual for future reference.
1x Magnetic Car Mount
1x Cushioned vent mount attachment (attached by default)
1x Windscreen mount with flexible gooseneck attachment
1x Product manual

What’s In The Box

PRODUCT OVERVIEW

This product provides an easy solution for your Mag Safe compatible smartphone by using magnetic alignment. Each person may have a different set of circumstances that may require the Magnetic Car Mount to be vent mounted, or windscreen mounted, and this product has been designed to cater for both scenarios.

  1. Magnetic Car Mount.
    Product Overview

  2. Cushioned vent mount (attached by default)
    Product Overview

  3. Windscreen mount
    Product Overview

QUICK START GUIDE

VENT MOUNT

  1. Ensure cap is tightened around nut (anti-clockwise to loosen, clockwise to tighten).
  2. Place vent mount onto the vent.
  3. Close the airflow vane for that vent to reduce the likelihood of the phone overheating when the car heater is in use.
  4. Place the phone on the Magnetic Car Mount and test the magnet strength before use. The magnets will assist in precise magnetic alignment.
    Vent Mount

WINDSCREEN MOUNT

  1. Remove the attached vent mount by loosening the cap turning anti-clockwise. Replace the vent attachment with the windscreen attachment and tighten clockwise.
  2. Place windscreen mount on the windscreen, ensuring it does not obstruct your field of vision.
  3. Move the lever to the closed position to create a vacuum hold between the suction mount and the windscreen.
  4. Place the phone on the Magnetic Car Mount and test the magnet strength before use. The magnets will assist in precise magnetic alignment.
    Windscreen Mount

TROUBLESHOOTING

Q: The mount will not stay upright, or my phone
falls off the mount when in use.
A: The cap can be loosened and tightened after installation to adjust the angle of the charging pad.
A: Please test your phone on the Magnetic Car Mount after installation to ensure that the magnetic alignment is providing sufficient strength. In most instances this should always work, but there is a risk that a 3rd party case may not provide sufficient magnetic strength.
Q: The phone will not magnetically attach
A: Please ensure your phone is Mag Safe compatible.
If using a case, please ensure it too is Mag Safe compatible.

IMPORTANT SAFETY INFO

Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion.

  1. Do not use near an open fire, heat source or excessive heat.
  2. Do not disassemble this device or attempt to modify it in any manner.
  3. This product has been designed to use in a vehicle, for personal use. If using the vent mount option, please ensure that the vane is closed if the heater is turned on to reduce the risk of the phone overheating.
  4. If installed in the windscreen position, please ensure it complies with local road laws so it does not obstruct your critical vision area.

All Sprout products go through thorough quality assurance inspections. If you find that your device is excessively hot, is emitting odour, is deformed, abraded, cut or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Sprout.

CONSUMER GUARANTEE

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you have any questions about your rights in relation to this product, please return it to point of sale or contact us at [email protected]
au. This warranty does not affect your legal statutory rights under the Australian Consumer Law. For more information about your rights under Australia Consumer Law go to www.accc.gov.au
Your Sprout Magnetic Car Mount is warranted to the original owner for 24 months from the date of purchase against defects in material and workmanship under normal use and service.
The warranty does not cover misuse of this product and liability will not exceed the purchase price of the product.
If you have any problems while using the product, please do not hesitate to contact our customer support team.
For warranty and technical support please visit sproutinc.com.au or email [email protected]
Thank you for choosing a Sprout product.

Customer Support

Scan the QR code to access an online version of this manual

QR Code

Sprout Accessories Pty Ltd
W: Sproutinc.com.au | E: [email protected]

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Sprout User Manuals

Related Manuals