sprout MKA-PAPERST Paper Storage Shelf Instruction Manual
- June 12, 2024
- Sprout
Table of Contents
Simple. Modern. American Made.
Paper Storage Shelf
Adult assembly only
Assemble completely before use
PARTS
|
---|---
ASSEMBLY INSTRUCTIONS
-
Insert Top Shelf c into slots on Left Side a , with the handhold facing inward. Note that the handhold can be oriented toward the front or back.
-
Tighten shelf c slightly, just enough to allow the shelf to stand up without tipping over.
-
Repeat Steps 1 & 2 with the Bottom Shelf c , making sure that the handhold is facing inward.
-
Set the desired number of Dividers d into slots on Left Side a . Note that the handhold can be oriented toward the front or back.
-
Carefully fit slots on Right Side b over tabs on Shelves c and Dividers d , going left to right, as shown. You must loosen the Top / Bottom shelves c for all the slots to line up.
-
Holding the sides together, carefully pick up the unit and set on its front, in the orientation shown. Press shelves c down until fiush with back edge to tighten.
-
Position on the slotboard as desired.
STOP Frustrated?
Need Help?
Talk to our customer
service agent at: +1 833-530-0033
QUARK ENTERPRISES, LLC PO BOX 1123, PROVO, UT 84601
MODEL NO. MKA-PAPERST
DOCUMENT: AI-MKA-PAPERST
WWW.SPROUT-KIDS.COM
COPYRIGHT QUARK ENTERPRISES 2022