Sprout MKA-CABINET Sliding Door Cabinet Instruction Manual
- June 12, 2024
- Sprout
Table of Contents
Sprout MKA-CABINET Sliding Door Cabinet Instruction Manual
PARTS
ASSEMBLY INSTRUCTIONS
-
Insert Top Shelf c into slots on Left Side a , with the grooves facing inward, and not next to the tabs for the slotboard.
-
Tighten shelf c by pushing down until back edge of shelf is flush with back edge of Left Side a .
-
Repeat Steps 1 & 2 with the Bottom Shelf c , making sure that the grooves are facing inward, and line up with grooves on Top Shelf c .
-
Lay cabinet on its back, as shown. Then slide in two Doors d in the desired orientation, with a handle on the left & a handle on the right.
-
Carefully fit slots on Right Side b over tabs on Shelves c . Ensure that the tab for the slotboard is on the same corner as Left Side a .
-
Holding the sides together, carefully pick up the unit and set on its front, in the orientation shown. Press shelves c down until flush with back edge.
-
Position on the slotboard as desired.
To remove from slotboard, pull up firmly to pop out bottom tab.
Adult assembly only
Assemble completely before use
Frustrated?
Need Help?
Talk to our customer service agent at:
+1833-530-0033