sprout AI-TODT-R9 Sous-Chef Toddler Tower Instruction Manual

: June 12, 2024
: Sprout

Table of Contents

sprout AI-TODT-R9 Sous-Chef Toddler Tower
Product Overview
Product Information
Parts
BEFORE YOU START
Assembly Instructions
Documents / Resources

sprout AI-TODT-R9 Sous-Chef Toddler Tower

Product Overview

Product Information

The product is called Sous-chef Toddler Tower, a simple, modern, and American- made product designed to assist toddlers in reaching elevated surfaces.

Parts

A – Left Side
B – Right Side
C – Back
D – Platform
E – Ladder
F – Extra Step
G – Dowel
H – Guard Plate

BEFORE YOU START

RECOMMENDED : A rubber mallet can help push pieces together.
A hammer can also be used with a scrap piece of wood or a cutting board placed over the surface being hammered for protection

Assembly Instructions

Place Left Side A on a carpeted floor with slots facing upward. Place tabs of Back into slots and use your weight to push down. Then use rubber mallet or push Back C horizontally to lock in place.
Make sure the side with the Step on the tab faces the same direction as the Notch in the slot.
Place tabs of Back C into slots and use your weight to push down. Repeate Step 1 with the other side. Place Side b on carpet and insert Back C tabs into the slots. Then stand up the assembly and push down on Back C to lock them into place.
Use a rubber mallet or push Back C horizontally to lock it in place. Spread sides apart to insert tabs on Platform D into slots on Back C at desired height. Push sides together to catch tabs on Platform D in slots on sides.
Spread sides just enough to insert Ladder E. If Platform D is not on the lowest setting, also insert Extra Step F. Push sides together, catching tabs on Ladder E and Extra Step F in slots on sides.
Repeat Steps 1-6 with the other side.
Push sides together, catching tabs on Ladder E and Extra Step F in slots on sides. Step on Ladder E to lock into place.
Insert Guard Plate H for children under 32” tall. Then slide Dowel G into hole from side. Twist Dowel G while pushing down to lock into place.

Note: It is the parent or guardian’s responsibility to determine the safest platform height for their child.

Disassembly Instructions

Remove parts E, F, G, and H.
Turn the tower upside down and place front legs against a wall.
Push near the middle of C to unlock tabs.
Use your weight to push C down to release.

Note: Adult assembly is required. Assemble completely before use. Avoid placing the Toddler Tower in sitting water. Do not use this product without adult supervision.

*Recommendations only. It is the parent or guardian’s responsibility to determine the safest platform height for their child

Adult assembly only
Assemble completely before use
Assemble on hard floor
Avoid placing the Toddler Tower in sitting water
Do not use this product without Adult Supervision

Need Help?

If you need assistance, please contact our customer service agent at: +1 833-530-0033
You can also email us at: support@sprout-kids.com
Watch our assembly video at: sprout-kids.com/tta

Contact Information

QUARK ENTERPRISES, LLC
PO BOX 1123, PROVO, UT 84601
Model No.: TODT-NAT-S
Website: www.sprout-kids.com

COPYRIGHT QUARK ENTERPRISES 2020

Documents / Resources

| sprout AI-TODT-R9 Sous-Chef Toddler Tower [pdf] Instruction Manual
AI-TODT-R9 Sous-Chef Toddler Tower, AI-TODT-R9, Sous-Chef Toddler Tower, Toddler Tower, Tower
---|---