POLARIS CM50 GPS LCD Instructions

**POLARIS CM50 GPS LCD Instructions

**

Overview

1. Toggle between camera views
2. Toggle between menu functions
3. Power on/ off
4. Decrease
5. Increase

Menu Functions

• Brightness: Adjust brightness
• Contrast: Adjust contrast
• Colour: Adjust colour
• Hue: Adjust hue
• Volume: Only applicable if cam has mic
• Zoom: Changes aspect ratio
• TCON (LD, RD, TU. LU): Reverse image /flip image upside down
• Language: Change language
• Reset: Reset all settings to factory

WARNING

1. Connect red ( + ) to Positive
2. Connect black ( – ) to Negative
3. This is a 12 / 24 Volt system
4. Plug in all wiring as per diagram
5. Do not connect 12 / 24 volt supply until monitor and camera are connected
6. Warranty is voided if you cut or modify any of the cabling (excludes positive and negative wires)
   

Optional Wiring Diagrams

Option 1: Reverse only

Option 2 : Continuous Operation

Option 3: Reverse trigger with continuous override

Monitor Insta//ationlOptionall

1. Firstly please fix the screws with and let fan shaped bracket tight, (see below pictures)
   

2. Secondly put the metal buckle piece on the top of the fan-shaped bracket into the notch at the back of the monitor.(see below pictures)
   

3. Move the bracket to the proper location.(see below pictures)
   

4. To fix the big screws of the bracket until to keep the monitor tight (see below pictures)
   

5. If users want to change the direction or angle of the monitor, firstly to loosen the screws on the bottom of the bracket. Then move the monitor to the desired location then fix the screws on the bottom of the bracket again.(see below pictures)
   

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>