POLARIS RANGER SP 570 NorthStar Edition UTV Car Instruction Manual
- June 4, 2024
- POLARIS RANGER
Table of Contents
POLARIS RANGER SP 570 NorthStar Edition UTV Car
Kit Components
Item # Qty. Description
1| 1| Winch Mount
2| 1| Hardware Kit (HK-031)
3| 1| Hardware Kit (HK-391)
3.1| 4| 3/8”-16 x 1.00 Hex Flange Bolt
3.2| 4| 3/8”-16 Hex Flange Nylock Nut
3.3| 4| 3/8”-16 Square Nut (not used)
INSTALLATION INSTRUCTIONS
Note: Make sure all hardware needed to complete this mount is in the package. Thoroughly read through and understand the instructions before installing.
- Remove front bumper by removing OEM bolts (A) found on the back side of the front bumper as shown in Figure 1.
- Assemble winch and contactor to winch mount (1) using hardware supplied with the winch as shown in Figure 2. See Figure 3 for wide, standard, and
- hole winch mounting patterns. NOTE: Make sure winch cable is spooling out between the winch drum and winch mount (1) as shown in Figure 2.
- Assemble winch fairlead to front bumper using hardware supplied with the winch as shown in Figure 4.
- Assemble winch mount (1) to front bumper supports using bolts (3.1) and nuts (3.2) as shown in Figure 5.
- Reattach front bumper to the machine using OEM bolts (A) removed in step 1.
WIRING INSTRUCTIONS
-
Run the red positive (+) battery wire from the contactor to the positive (+) post on the pulse bar. Run the black ground wire (-) from the contactor to the ground (-) post on the pulse bar as shown in Figures 6 & 7.
-
In the center console of the ranger, there are pre-notched holes for the dash rocker switch to mount as shown in Figure 8 & 9.
NOTE: If the winch only comes with a handlebar mounted rocker switch you and wish to install it in the dash, assemble per Figure 10 using hardware kit HK-031 (3). -
If the Polaris 3-pin wire harness for the pulse bar is not being used, attach the ignition fed (red) wire from the switch to the orange wire (B) as shown in Figure 7.
-
Using the wiring instructions provided in the winch manual, wire accordingly.
©2021 Copyright Kappers Fabricating, Inc. All rights reserved