StarTech com AF212C 1-Port 2.5GbE PoE Plus Injector User Guide
- July 1, 2024
- StarTech com
Table of Contents
StarTech com AF212C 1-Port 2.5GbE PoE Plus Injector User Guide
Top
| Component | Function |
|---|---|
| Mounting Holes |
- Mount the PoE Injector to an appropriate surface
| Power Input|
- Connect the included Eft (1.8m) NA Power Cord
| Power LED|
- Solid Green: PoE Injector is receiving power
| PoE+ Port (Data + PoE)|
- Connect an Ethernet Cable to a PD (Powered
Device)
-
Supports 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps
-
Supports 802.3af and 802.3at
| Data Port| Connect an Ethernet Cable to a Network Device
Supports 2.5Gbps, 1Gbps, 100Mbps, and
10Mbps
Product Information
For the latest product information, technical specifications, and declarations
of conformance, please visit: www.StarTech.com/AF212C-
POE-INJECTOR
Requirements
- Network Cables x 2
Package Contents
- PoE Injector x 1
- 6ft (1.8m) NA Power Cord x 1
- Quick-Start Guide x 1
Installation
(Optional) Mount the PoE Injector
- Determine the Mounting Surface and Location for the PoE Injector.
- Mount the PoE Injector to the desired Mounting Surface using the appropriate Mounting Hardware (e.g. Wood Screws) through the built-in Mounting Holes.
Install the PoE Injector
- Connect an Ethernet Cable from the Source Network Device (i.e., router, modem, or non-PoE switch) to the Data Port on the PoE Injector.
- Connect an Ethernet Cable to the PoE+ Port on the PoE Injector.
- Connect the other end of the Ethernet Cable used in Step 2 to either a PD (Powered Device) or a PoE Splitter to separate Data and Power.
- Plug the included NA Power Cord into an AC Outlet and connect it to the Power Port, located on the rear of the PoE Injector. Verify that the Power LED is illuminated.
Regulatory Compliance
FCC – Part 15
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by
StarTech.com could void the user’s authority to operate
the equipment.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer
to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
This device may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
StarTech.com LLP 4490 South Hamilton Road Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15 Gowerton Rd, Brackmills Northampton NN4 7BW United Kingdom
StarTech.com Ltd.
Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands