Maxxima MRL-S409105 Trimless Floating Gimbal Downlight Instructions

June 29, 2024
Maxxima

Maxxima MRL-S409105 Trimless Floating Gimbal Downlight

Maxxima-MRL-S409105-Trimless-Floating-Gimbal-Downlight-
product

Product Information

Specifications

  • Model: MRL-S409105
  • Brand: Maxxima
  • Type: Trimless Floating Gimbal Downlight
  • Website: www.maxximastyle.com

Product Usage Instructions

Warnings and Cautions

  • Ensure power is switched off before installation.
  • Follow all installation instructions carefully to prevent accidents or damage.

Installation Instructions

  1. Turn off power by switching off the circuit breaker or removing the fuse.
  2. Mark the center point for the fixture and use the provided template to cut the required hole.
  3. Install the plaster frame using the provided screws and secure it to the ceiling.
  4. Plaster over the frame, being careful not to overfill.
  5. Use the CCT switch to select the desired color temperature.
  6. Open the junction box, remove the knockout, and attach a twin clamp connector.
  7. Connect the wires following color codes (black to black, white to white, green to green).
  8. Insert all wires into the junction box and close it.
  9. Insert the junction box into the plaster frame and lock the fixture in place.
  10. Restore power to complete the installation.

3-Year Warranty
Maxxima offers a 3-year limited warranty covering defects in material and workmanship. Contact for warranty claims.

FAQ

  • Q: Is the twin clamp connector provided with the product?
    A: No, the twin clamp connector is not provided with the product. You need to purchase it separately for installation.

  • Q: Can I adjust the color temperature after installation?
    A: Yes, you can use the CCT switch on the junction box to adjust the color temperature even after installation.

  • Q: What should I do if the fixture fails within the warranty period?
    A: Contact Maxxima for a replacement if the fixture fails due to defects in material or workmanship within the warranty period.

4” Trimless Floating Gimbal Downlight Installation Guide

MRL-S409105
www.maxximastyle.com

WARNINGS

  • Risk of electric shock – Disconnect power at the source before installation.
  • If you are unsure about the installation or the maintenance of the fixture, please consult an electrician.
  • Do not make or alter any holes in the wiring enclosure or modify any electrical components.

CAUTIONS

  • The fixture must be wired in accordance with the National Electric Code (N.E.C) standards and any applicable local codes or ordinances.
  • Supply conductors must at least be rated for 90°C/194°F.
  • This fixture is designed for use with 120Vac, 50/60Hz only.
  • Suitable for damp locations.

INSTALLATION INSTRUCTIONS

  1. Ensure the power has been turned off by switching the circuit breaker to the o ff position or by removing the fuse from the fuse panel.
  2. After marking the center point of where the fixture will be located, using the provided template cut the required hole shown in figure 1.
  3. Install the plaster frame into the new cutout and use the four screws provided, secure hte frame to the ceiling shown in figure 2.
  4. Plaster over the plaster frame ensuring not to apply too much plaster to fill beyond the raised rim shown in figure 3.
  5. Using the CCT switch on the junction box, preview and select the desired color temperature.
  6. Open the junction box, remove the desired knockout and attach a twin clamp connector (not provided or necessary).
  7. Insert the supply wire through the twin clamp or the knockout.
  8. Connect the hot (black) wire to the black supply wire, the neutral (white) wire to the white supply wire, and the ground (green/bare copper) wire to the green using the supplied wire nuts shown in figure 4.
  9. Put all wires into the metal junction box and close the box.
  10. Insert the junction box into the plaster frame, ensuring the junction box is laying on the ceiling material. Then align the locking tabs on the side of the fixture so the fixture can be inserted into the frame, rotate the fixture until it is locked in place, see figure 5.
  11. Installation is now complete. Restore power, the fixture is now operational.

Maxxima-MRL-S409105-Trimless-Floating-Gimbal-Downlight-
\(4\)

3 YEAR WARRANTY

Maxxima extends a 3 year limited warranty to the original purchase that the products listed are free from defects in material and/or workmanship only. Maxxima will replace any warrantied product to the original consumer/purchaser if the product fails because of defects due to workmanship and/or materials within the limited warranty period. Limited warranty is not transferable and applies to the original installation of the Maxxima product. This offer does not constitute in any way a product guarantee and Maxxima does not hereby assume any obligation whatsoever beyond sending a free replacement product.

info@maxximastyle.com
866-MAXXIMA (629-9462)
www.maxximastyle.com
125 Cabot Court Hauppauge, NY 11788

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Maxxima User Manuals

Related Manuals