Aver M70Wv2 Mechanical Arm Wireless Visualizer Instruction Manual

Aver M70Wv2 Mechanical Arm Wireless Visualizer

Product Information

Specifications:

• Model: M70Wv2
• Package Contents:
  • M70Wv2
  • Power Adaptor
  • Power cord*
  • Remote controller
  • AAA Battery (x2)
  • USB Cable
  • Quick Start Guide
  • Warranty card
  • 2nd Wi-Fi Dongle (Europe, Japan, Taiwan only)
• Optional Accessories:
  • Carrying Bag
  • Anti-glare Sheet
  • Microscope Adapter (28mm and 34mm Rubber Coupler included)

Product Usage Instructions

Parts Info:

1. Camera head
2. LED lamp
3. Arm
4. IR sensor
5. Control panel
6. Handle

Compound Key:
Press the key to cycle through different resolutions and modes.

Remote Control:

• POWER: Turn the camera on or off.
• Wi-Fi/USB: Switch between Wi-Fi and USB modes.

Control Panel Functions:

Frequently Asked Questions (FAQ):

• How do I switch between camera and computer video signals?
  To switch between camera and computer video signals, use the CAMERA/PC button on the remote control.

• How can I capture still images in Camera mode?
  To capture still images in Camera mode, press the CAPTURE button on the remote control.

Package Contents

The M70Wv2 comes with a pre-installed Wi-Fi dongle.
**The power cord will vary depending on the standard power outlet of the country where it is sold.

Optional Accessories

Parts Info

1. Camera head
2. LED lamp
3. Arm
4. IR sensor
5. Control panel
6. Handle
7. Built-in mic
8. Battery indicator
9. USB mini port
10. USB port
11. Wi-Fi dongle
12. Kensington lock
13. HDMI input
14. HDMI output
15. DC power jack

Compound Key

Reset to factory default settings.

With each press, cycle through the following resolutions:

• Auto detection (4K, 720P, 1080P)
• 1024×768 (in supported HDMI device)
• 4K 60Hz (in supported HDMI device)

With each press, cycle through Normal, Motion, High quality, Microscope, Infinity, and Marco modes.

Remote Control

press this button again to stop.
4.  FREEZE| Freeze live images.
5.  ROTATE| Rotate the image by 0/180° in Camera mode.
6.  INFO/| Press to view system information and battery power status.
7. ▲,▼,◄, & ►| Pan and zoom-in image in live streaming.
8. AUTO FOC| Adjust the focus automatically.
9. ZOOM +/-| Increase/decrease the image magnification in camera mode.
10. ZOOM 1X| Reset zoom level to 100%.
11. MUTE| Set the volume to mute.
12. CAMERA / PC| Switch the video signal between camera and computer from the HDMI Input port
13. RECORD| Start/Stop audio & video recording. Video recording can only be saved in a USB flash drive.
14. RESOULTION| Press to switch between following modes:

• Auto detects the best resolution(4K, 720P, 1080P)
• 1024×768 (in supported HDMI device)
• 4K 60Hz (in supported HDMI device)

15. AE LOCK| Lock the exposure to stop M70Wv2 attempting to find optimal exposure.
16. LAMP| Turn the overhead light on/off.
17. DEL| Delete the selected picture/video in Playback mode.
18. MODE| Press to switch between Normal, High frame, and High quality, Microscope, Infinity, or Marco mode.
19.| Make a selection.
20. VOLUME +/-| Adjust the volume.
21. BRIGHTNESS

+/-

| Adjust the brightness.
22. RESET +/-| Reset to factory default setting.
23. Wi-Fi Indicator| Wi-Fi status indicator: Refer to .

Control Panel

LED Indicator

No light: Power off
Solid red: Standby (Camera is connected to power but not in operation.)
**Battery

| Solid green(x3 ) : Battery is full(100%-60%) Solid green(x2 ): Battery is 60%-30% Solid green(x1 ): Battery is 30%-5%
Solid red (x1): Battery is 5%-0% Flashing red (x1): Battery is out of power Solid orange(x3): Battery is abnormal
Wi- Fi **| Solid blue: AP Mode Ready / STA connected
Slow flashing blue: Software connection with camera Short flashing blue: Create AP mode / STA connecting Solid green: Miracast mode ready
Slow flashing green: Miracast streaming start
Quick flashing green: Miracast device scan / connecting

[Note]
The battery will be exhausted for long-term usage. Do not replace the battery yourself. Please contact your dealer.

Device Connection

Charge Your Camera
Your camera comes with a built-in battery. Before using it for the first time, charge it for at least 3 hours. Connect to a power outlet using the included power adapter and power cord.

• You can also use a computer to charge your camera.
  • Your camera must not be in operation. A solid red light on the power button indicates that it is in Standby mode.
  • Connect the included USB cable to the mini USB port on the camera and connect the other end to a USB port on a computer. Charging with a computer will be slower.
• If your camera is frozen, press to restart.

USB Connection

Connect to a computer using the included USB cable to work with video conferencing software.

You can also plug in a USB flash drive to save images and videos. Press the Capture button to capture images and the Record button to record videos.

HDMI Connection

1. By connecting a computer to the HDMI in port and a monitor or projector to the HDMI out port, images and videos from the computer can be projected.
2. Press the Camera/PC button to switch between camera input and computer input.

Peer-to-Peer (P2P) Connection via Wi-Fi Dongle (Windows only)

Method 1

1. Download and install AVerTouch software to your computer from AVer Download Center.(https://www.aver.com/download-center).

   • Do not connect your camera to a computer with the included USB cable.

2. Press the Wi-Fi button to turn on Wi-Fi mode. The Wi-Fi indicator will be solid blue.

3. Plug in the second Wi-Fi dongle to your computer. Your camera comes with 2 Wi-Fi dongles, one pre-installed in the camera. If you don’t find a second dongle, it may be an optional accessory in your region or country. Contact your local reseller.

4. Open AVerTouch.

   • A white camera card will appear when your camera is detected.
   • Your camera name is “AVer model name – Wi-Fi dongle MAC address”. Find the MAC address on the bottom of your camera.
     

5. Click the Connect icon to connect your camera. When prompted, click Done.
   If an IP conflict error message appears, see to troubleshoot.

6. Camera live view will start immediately. Or click the Play icon to start live view.

Method 2

1. Download and install AVerTouch software to your computer from AVer Download Center.(https://www.aver.com/download-center).
   • Do not connect your camera to a computer with the included USB cable.
2. Press the Wi-Fi button to turn on Wi-Fi mode. The Wi-Fi indicator will be solid blue.
3. Plug in the second Wi-Fi dongle to your computer. Your camera comes with 2 Wi-Fi dongles, one pre-installed in the camera. If you don’t find a second dongle, it may be an optional accessory in your region or country. Contact your local reseller.
4. Select the Network icon on the taskbar. The icon that appears depends on your current connection state.
5. Choose your camera from the list of networks, then select Connect.
   • Make sure you select the network of the Wi-Fi dongle. If your computer has built-in Wi-Fi or you are also using other non-AVer Wi-Fi dongles, you may see a drop-down list (Wi-Fi 2, Wi-Fi 3 and so on).
   • Your camera name is “AVer model name – Wi-Fi dongle MAC address”. Find the MAC address on the bottom of your camera.
6. Enter the network password AVeradmin, then select Next.
7. Select Yes to allow your computer to be discoverable.
8. Open AVerTouch. A purple camera card will appear when your camera is detected. Click the Play icon to start live view.

Troubleshooting Peer-to-Peer (P2P) Connection

Your camera remembers the connection setting last time you connected it wirelessly. If you are changing connection method, such as from Peer-to-Peer (P2P) to Wi-Fi, press the factory reset compound key to clear previous frequency band setting.

IP Conflict

1. Connect your camera to the computer using the included USB cable.
2. Open AVerTouch.
   • A purple camera card (USB mode) will appear when your camera is detected.
3. Click the Camera information icon. Choose a different IP address from the IP address drop down list. Click Done
4. Unplug the USB cable. Click Sync to refresh. A white camera card will appear when your camera is detected. Go back to Step 5 in <Peer-to-Peer (P2P) Connection> to connect again.

Wi-Fi Connection

1. Download and install AVerTouch software to your computer from AVer Download Center.(https://www.aver.com/download-center).

   • Make sure your computer has Wi-Fi.
   • Do not plug in the second Wi-Fi dongle to your computer.
   • Do not connect your camera to a computer with the included USB cable.

2. Press the Wi-Fi button to turn on Wi-Fi mode. The Wi-Fi indicator will be solid blue.

3. Open AVerTouch.

   • A white camera card will appear when your camera is detected.
   • Your camera name is “AVer model name – Wi-Fi dongle MAC address”. Find the MAC address on the bottom of your camera.

4. Click the Connect icon to connect your camera.
   Choose Router from the Connection mode drop-down list. Then choose your Wi-Fi network and enter the password. Click Done.

5. Camera live view will start immediately. Or click the Play icon to start live view.

Miracast Connection

Your display device must support Miracast. If the display device does not support Miracast, you can use a Miracast wireless display adapter that connects to an HDMI port on your device.

1. Press the Info button to open the on-screen display menu.
2. Go to Wireless > Mode > Miracast to turn on Miracast mode.
3. Go back to Miracast Setup to select your display device.

Using the Camera

Orientation Ring

Shooting Area
When camera position is 470mm high, the shooting area will be A3 size.

Store the Camera

Mount the Camera on a Flat Surface
[Note] M4 screw x4, depth is5mm

Specifications

EAP-PEAP, EAP-TLS
Power Source| DC5V/3A, AC 100-240V
Consumption| 13.7 Watts(lamp on)
12.7 Watts(lamp off)
Lamp Type| LED light
USB| USB2.0 Type-A x2 (Wi-Fi Dongle, USB storage)
USB Type mini-B x 1
DC 5V Input| Power Jack
MIC| Built-in
Operating| 587mm(L)159 mm(W)546mm(H) (+/-2mm include rubber foot)
Folded| 363.5mm(L)159mm(W)*76.3mm(H)
(+/-2mm include rubber foot)
Weight| 2.6 kg (about 5.7lbs)
Software Supported| ePTZ
Image/ Area capture Picture by Picture Timer
Cloud library Recording
Annotation

Warning

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Warranty will be void if any unauthorized modifications are done to the product.

• Do not drop the camera or subject it to physical shock.

• Use the correct power supply voltage to avoid the damaging camera.

• Do not place the camera where the cord can be stepped on as this may result in fraying or damage to the lead or the plug.

• Hold the bottom of the camera with both hands to move the camera. Do not grab the lens or Flexible arm to move the camera.

• Do not pull the mechanical arm and camera part in the opposite direction.

Radio Frequency
FOR PORTABLE DEVICE USAGE ( <20m from body/SAR needed eg. BT dongle, smartphone) Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

FOR MOBILE DEVICE USAGE ( >20cm/low power eg. AP routers)
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Europe – EU Declaration of Conformity
This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU). The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the Radio Equipment Directive (2014/53/EU)

Warning
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Caution
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries in a safe and proper manner.

DISCLAIMER
No warranty or representation, either expressed or implied, is made with respect to the contents of this documentation, its quality, performance, merchantability, or fitness for a particular purpose. Information presented in this documentation has been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained in this documentation is subject to change without notice.
In no event will AVer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages.

TRADEMARKS
“AVer” is a trademark owned by AVer Information Inc. Other trademarks used herein for description purpose only belong to each of their companies.

COPYRIGHT
© 2024 AVer Information Inc. All rights reserved. | January 10, 2024
All rights of this object belong to AVer Information Inc. Reproduced or transmitted in any form or by any means without the prior written permission of AVer Information Inc. is prohibited.
All information or specifications are subject to change without prior notice.

More Help
For FAQs, technical support, software and user manual download, please visit:

Headquarters
Download Center:
https://www.aver.com/download-center

Technical Support:
https://www.aver.com/technical-support

Europe Branch Office
Download Center:
https://www.avereurope.com/download-center

Technical Support:
https://www.avereurope.com/technical-support

Contact Information
Headquarters
AVer Information Inc.
https://www.aver.com
8F, No.157, Da-An Rd., Tucheng Dist., New Taipei City 23673
Taiwan Tel: +886 (2) 2269 8535

Europe Branch office
AVer Information Europe B.V.
https://www.avereurope.com
Westblaak 134, 3012 KM, Rotterdam, The Netherlands
Tel: +31 (0) 10 7600 550
Technical support: eu.rma@aver.com

Japan Branch Office
https://jp.aver.com
Tel: +81 (0) 3 5989 0290
https://jp.aver.com/technical-support

Vietnam Branch Office
Công ty TNHH AVer Information (Việt Nam)
Tầng 5, 596 Nguyễn Đình Chiểu, P.3, Quận 3, Thành phố Hồ Chí Minh 700000, Việt Nam Tel: +84 (0)28 22 539 211

References

• アバー・インフォメーション | 書画カメラ、ビデオ会議システム、タブレットPC充電保管カートの専門メーカーです| AVer Japan
• アバー・インフォメーション | 書画カメラ、ビデオ会議システム、タブレットPC充電保管カートの専門メーカーです| AVer Japan
• アバー・インフォメーション | 書画カメラ、ビデオ会議システム、タブレットPC充電保管カートの専門メーカーです| AVer Japan | ヘルプセンター
• AVer USA
• AVer USA
• AVer Global | Download Center | AVer Global
• Technical Support ! AVer Global
• AVer Europe
• AVer Europe
• AVer Global | Download Center | AVer Global
• Technical Support ! AVer Europe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>