sunsky S3PRO Low Power Smart Camera User Manual

sunsky S3PRO Low Power Smart Camera

Specifications :

• Product Name: S3PRO Low-power Smart Camera
• Design: Ultra portable
• Compatibility: Android and iOS devices
• Network: Supports 2.4G WiFi

Product Usage Instructions

Appearance Introduction
Thank you for purchasing the smart camera. The device features a unique ultra-portable design suitable for various applications, providing convenient, safe, and colorful daily life experiences.

App Download
To download the BotslabAPP, scan the QR Code provided.

Registered User

1. Open the APP and click Sign up.
2. Enter your phone number or email to register.
3. Receive the verification code and set the password to complete the registration.
4. When logging in, ensure the location is set to your current area.

AP Mode Connection Settings

1. Prepare by switching OFF/ON to turn on the camera.
2. For RESET, turn the switch button to On, press and hold the RESET button for about 5s until the red and blue lights are all on. Then, the blue light flashes slowly, and you will hear a beep indicating successful reset.

WiFi Remote Monitoring Settings

1. Ensure your phone is connected to a 2.4G WiFi network.
2. Follow the steps for adding the device and configuring it via WiFi for remote monitoring.

AP Mode And P2P Mode Device List Distinction
In AP mode device list, you can control devices directly. In P2P mode device list, you will find your associated devices.

FAQ :

• Q: How do I reset the camera?
  A: To reset the camera, turn the switch button to On, press and hold the RESET button for about 5 seconds until the red and blue lights are all on. Then, wait for the blue light to flash slowly and hear a beep indicating successful reset.

• Q: Which network does the camera support?
  A: The camera supports 2.4G network for connectivity.

S3PRO Low-power Smart Camera
User Manual
Thank you for purchasing the smart camera. The device adopts a unique ultra portable design, so that it can be applied in various fields and bring you convenient, safe and colorful daily life. Please set up your camera correctly according to the steps in the instructions.

Appearance Introduction

• RESET: Turn the switch button to “On”, press and hold the RESET button for about 5s until the red and blue lights are all on, then the blue light flashes slowly, and hear a beep, reset is successful
• App Download
  Scanning the QR Code to download “Botslab” APP;

App Download
Scanning the QR Code to download “Botslab” APP;

Registered User

Open the APP and click “Sign up”, enter your phone number or email to register, receive the verification code, and set the password to complete the registration.
Note: When logging in to your account, the location should be selected your current area. E.G:

AP Mode Connection Settings
Preparation: Switch OFF/ON to turn on camera;

1. Add device
2. Choose low-power Camera S3PRO
3. Click AP direct connection
4. Click Next step after the camera is reset
5. Connect device hotspot
6. Connect to the hotspots “FC02-***”
7. Set password
8. AP mode device is added successfully

WiFi Remote Monitoring Settings

Note: The phone needs to connect a 2.4G WiFi.

1. Add device
2. Choose low-power Camera S3PRO
3. Check and click Next step after camera is reset
4. Choose Network configuration via WiFi
5. Searching device Method 2: QR Code Configure Network
6. When the device is found, click Configure network to connect
7. Method 2: Aim the QR code at the camera, 10-15cm is better distance
8. Enter WiFi password The device only supports 2.4G network
9. Connecting to network—Successfully added
10. Remote real-time monitoring

AP Mode And P2P Mode Device List Distinction

• AP mode device list: Me–AP direct device control
• P2P mode device list: Home–My device

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>