COOPER RSQ4LS9FSD2W1EWH Square Recessed Baffle LED Trim Installation Guide

COOPER RSQ4LS9FSD2W1EWH Square Recessed Baffle LED Trim

RSQ4 4” Square Recessed Baffle LED Trim
This LED trim installs into most 4” recessed housings and is the perfect lighting solution for low to medium height ceilings. A shallow square lens and rotatable baffle trim make installation and alignment a breeze. The selectable lumens, 6-position color selectability, and flicker-free 5% dimming allow for easy lighting customization. Upgrade your lighting with the RSQ Series today.

Product Certification

Interactive Menu

• Order Information page 2
• Product Specifications page 2
• Energy Data page 3
• Photometric Data page 3
• Product Warranty
• Dimming Guide

Product Features

Top Product Features

• Square 4” LED trim is suitable for new construction, remodel, and retrofit installation in most 4″ IC (insulation contact) or non-IC housings
• Lens & Trim: Shallow square diffuse lens and rotatable baffle trim make installation and alignment easy
• 6-Position Switch: 5-color Field-SeleCCTable (2700K, 3000K, 3500K, 4000K, 5000K) + Dim-to-warm (3000K dims to 1800K); 90+ CRI
• Brightness (Lumens): Lumen Select Switch – 600/900 lms (nominal)
• Dimming: Dims to 5% (phase cut LE/TE) with compatible dimmers; 120V input
• Includes preinstalled Push-N-Twist universal installation clips; orange LED Quick Connect and E26 medium socket adapter
• Integral gasket meets AIR-TITE and code compliance for additional energy savings
• 50,000 hrs of maintenance-free operation in damp or wet locations
• 5-year warranty

Dimensional and Mounting Details

Order Information

Catalog Number| Description| Lumens (nominal)| CRI| CCT| Driver| Finish
---|---|---|---|---|---|---
RSQ4LS9FSD2W1EWH| 4-inch square recessed LED trim| 600/900 selectable lumens (nominal)| 90+CRI| 6-Color Field-SeleCCTable: 2700K, 3000K, 3500K, 4000K, 5000K, Dim-to-Warm| 5% Phase Cut LE/TE Dimming, 120V 60Hz| Matte White

Accessories – Decorative Baffle Trim Overlays (sold separately)

Compatible Housings

HALO – 4″ Housings 1

H99ICT, E4ICATSB, E4TATSB, E4RTATSB
Shallow Housings| H245ICAT, H245RICAT
Fire Rated Housings| H450FR2ICAT
Junction Box Housings| JB4FR2

This fixture is UL Certified for use with any 4″ diameter recessed housing constructed of steel or aluminum with an internal volume that exceeds 62.3” in3 addition to those noted below and does not exceed the input rating of the housing.

Product Specifications

• Module
  • The LED module consists of an LED array, optical assembly, driver, and self-flanged trim
  • Rotatable square baffle trim
  • Achieves L70 at 50,000 hrs in IC (insulation contact) and non-IC applications
• Selectable System
  • Use the CCT select switch to choose between D2W (Dim-to-Warm), 2700K, 3000K, 3500K, 4000K, and 5000K CCT
  • D2W option starts at 3000K and warms to 1800K as the fixture dims
  • Factory default is set to 3000K
  • Use Lumen Select switch to choose the brightness level
  • Lumen Select factory default is 900 lm
• LED Array
  • Mid-power LED array provides a uniform light source with high efficiency and no pixilation
  • 90+ CRI minimum, R9 greater than 50
  • Color accuracy at 4 SDCM in between endpoints, provides color accuracy and uniformity
• Driver
  • Integral 120V 60Hz constant current driver provides noise-free, high-efficiency operation
  • Dimmable: Continuous, flicker-free dimming from 100% to 5% with compatible leading or trailing edge (LE/TE) 120V phase cut dimmers; (See Dimming Guide for compatible dimmers.)
  • Tip: For optimal dimming performance, consider dimmers with low-end trim adjustment; Note that some dimmers require a neutral wire in the box.
  • Wiring: Includes inline electrical orange LED Quick Connect and E26 medium socket adapter to provide mains connection
• Retention
  • Push-N-Twist universal installation clips are preinstalled and designed to fit compatible recessed housings
• Trim
  • The one-piece step baffle and self-flanged square trim ring provide lens regression and reduce light leaks
  • Injection-molded plastic construction is impact-resistant and non-corrosive
  • Non-conductive construction meets most local dead-front code requirements
• Gasket
  • Closed-cell gasket achieves restrictive airflow requirements without additional caulking
• Overlays (sold separately)
  • Overlays are accessory trims that attach to the fixture for a decorative finish
• Compliance
  •  UL Certified for US and Canada, type IC suitable for direct contact with air permeable insulation
  • UL Certified for US and Canada for use with HALO housings, classified for use with other’s housings, see instruction sheet for conditions of acceptability
  • Wet location listed
  • Air-Tite per ASTM-E283
  • Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
  • EMI/RFI emissions per FCC 47CFR Part 15 consumer limits
  • Contains no mercury or lead and RoHS compliant
  • Photometric testing in accordance with IES LM79-08
  • Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
  • Can be used for State of California Title 24 high efficacy luminaire compliance, reference the California Energy Commission Title 20 Appliance Efficiency Database for current listings
  • ENERGY STAR® listed, reference database for current listings
  • Meets State of California voluntary lamp standards
• Warranty
  • Five year limited warranty, consult website for details. www.cooperlighting.com/warranty

Energy Data

RSQ4LS9FSD2W1EWH – 3000K

Photometric Data

Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com

© 2024 Cooper Lighting Solutions All Rights Reserved.
Specifications and dimensions subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>