iGAGING 400-D69 Digital Depth Indicator Set Instructions
- June 26, 2024
- iGAGING
Table of Contents
INSTRUCTION
Item# 400-D69
400-D69 Digital Depth Indicator Set
Please read through this instruction carefully before using the tool. Use
the tool for its intended purpose only.
Item# 400-D69 : 0-22” Digital Depth Indicator Set**
Parts:
- Two-Threaded Positions Depth Base
- Connector (installed on indicator)
- Digital Indicator (item# 35-128)
- Depth Rods: 1,2,3,4,5,6”
- Measuring points: (flat, needle, ball, spline)
- Full set with protective case
-
Specifications
Indicator range: 0-1”/25mm Depth gauge range: 0-22”
Indicator resolution: 0.0005” / 0.01mm / 1/128th
Indicator accuracy: ±0.001”/0.03mm
Indicator repeatability: 0.0005”/0.01mm
Indicator power: 3V, CR2032 Battery
Indicator battery life: 1/2~ 1 year under normal operation -
Operations
Indicator: Please refer to iGAGING digital indicator 35-128 instruction on indicator usage.
Zero setting:
1. Secure the indictor on base with flat or ball points (without any rod attachment); press down the indicator against a flat surface and make sure base is tightly against the surface; press the ZERO key on the indicator to set zero. Rods can be added to the indicator after zero setting.
2. For using needle and spline tips: since the contacts will extend from the base, please use a setting master for a relative zero setting.
Depth base: 2-position base for easy position exchange.
Connector: screw and un-screw to change position of the indicator on the base.
Depth rods: 1” to 6” rods can add up to 22” in range.
Measuring contacts: Ball, Flat, Needle, & Spline.
Zero setting with ball contact and without extension on a flat surface Zero setting when using extension rod and/or flat, needle, or spline point and with a pair of block, and on a flat surface.
- Do not disassemble the instrument.
- Do not subject the instrument to blows or shock.
- Do not store the instrument under direct sun light.
- Avoid exposing unit to strong magnetic fields and live voltage.
- Use soft cloth to clean instrument before and after usage. Never use organic solvents such as acetone or benzene to clean.
Smart phone scan
WARNING: Cancer and reproductive ham- www.p65Warnings.ca.gov
Copyright © 2024 IPIC | iGAGING
San Clemente, California