SMART GB4706 Electric Mug Heater with USB Cable Instruction Manual
- June 13, 2024
- Smart
Table of Contents
SMART GB4706 Electric Mug Heater with USB Cable Instruction Manual
Description
Keep your beverage at the ideal temperature. The heated base keeps your beverage hot thanks to its special low-energy thermostatic control system. You can easily adjust it with the switch on the bottom.
Product structure
Instructions for use
The warmer must be placed on a flat surface. The indicator light indicates the
power and operating status of the base.
During use: Make sure the cup is cleaned before filling it and placing it
on the circular heating surface. To start the process, the indicator light
must be on and the switch must be turned on.
To switch off: Remove the cup from the base to stop operation.
Notes: The use of the warmer is to keep the temperature of the beverage
constant at 52°C -55°C. This temperature is affected by the room temperature
and also by whether the mug is covered with a lid or not.
Maintenance
A. Turn off, remove the USB cable and let it cool down before cleaning.
B. To clean the warmer, always wipe with a dry cloth. Never immerse the
device in water.
C. If the product is not used for a long time, dean it and place it in a
dry and well-ventilated place to avoid moisture.
Warning
To use this product safely, please read and follow the instructions below:
A. The device is not a toy. Children should not play with the product.
Keep out of the reach of children.
B. Check that the power supply voltage meets the power requirements as
indicated in the manual.
C. Products should not be placed where children or handicapped persons
can reach. CAUTION – some parts of this product may become very hot and cause
skin burns.
D. During use, always keep the plug dry. Avoid pouring water on the
product.
Caution – Never immerse the product in water to clean it. You should
unplug and let it cool down before cleaning with a dry cloth.
E. Warning: If the surface is broken or the cord is damaged, do not use
the product. F. Do not leave the device unattended when it is connected to the
USB.
G. Do not place products on the device that may be damaged by exposure to
high temperature for a long time (laptop, battery, etc.).
H. Do not use water bottles, double-walled isothermal cups or thick-
bottomed cups.
Trouble shooting
The base does not heat up and the indicator light remains off:
Check if the power is connected and if the plug is loose or not. If it does
not make good contact then the indicator light will flash.
Check if the base is placed on a flat surface and if there is anything under
the switch that is blocking it.
The indicator light is on and the base is not heating up:
There is a heat transfer process in the base. After activating the product, it
will take about 5 minutes for the temperature to reach the desired level.
The temperature is low:
Place the mug in the center of the base and cover with a lid.
**MUG WARMER
**
Product Specifications
Name: Mug warmer
Rated power: 10W (USB power supply)
Output rated voltage: DC 5V Input rated voltage: 110V-50Hz
Weight: approx. 230 g Size: 170 x 145 x 38 mm
Standard: GB4706.1-2005 GB4706.55-2008