iGAGING 35-040 Electronic Digital Micrometer Instruction Manual
- October 30, 2023
- iGAGING
Table of Contents
35-040 Electronic Digital Micrometer
Instruction Manual
Operation Manual
Please read through this owners manual carefully before using your new
tool. Use your tool propely and only for its intended use.
iP40: 35-040-xx
iP54: 35-054-xx
Parts
- LCD display
- Friction drive
- Quick drive
- ABS/INC …UNIT key
- ON/OFF… SET key
- Data output
- Locking screw
Keys
ON/OFF …SET key: Power switch ; ZERO setting.
ABS/INC…UNIT key: Absolute & relative measuring. Metric/inch conversion.
LCD Display
****INC : Relative measuring mode.
in: Unit: inch.
mm : Unit: metric.
Operation
Two ways of pressing the keys are used in the following illustrations:
- Short Press: Press and release;
- Long Press: Press and hold for 3~5 seconds.
4.1 ON/OFF …SET key:
On/Off: Short press the key to turn the gauge on or off.
Set or reset zero: Long press the key to set zero, LCD display will reset to
zero.
4.2 ABS/INC …UNIT key:
Short press: Absolute and Incremental mode measuring mode conversion; INC
(Incremental) sign displayed on
LCD for relative measuring mode. Short press the key again to disable the
function.
Long press: Metric (mm) /inch (in) conversion.
Specifications
Measuring force: 5~10N.
Storage temperature: -20~60°C
Power consumption: 20 A
Dust / Moisture Protective Rating: iP40 or iP54 rated
Operating temperature: 0~40°C.
Precautions
- Do not subject the instrument to blows or knocks. Do not drop it or apply excessive force.
- Do not disassemble the instrument.
- Do not press the keys with a pointed object.
- Do not use or store instrument under direct sunlight, or in an excessively hot or cold area.
- Do not use the instrument near strong magnetic fields and high voltages.
- Use a soft cloth or a cotton swab that is dry to clean the instrument. Do not use organic solvent such as acetone or benzene. Alcohol may be used.
- Wipe the measuring faces of the instrument before using it.
- Remove the battery if the instrument is not used for a long period of time.
Troubleshooting
Please replace battery (CR2032) when display: does not power-on; display fade;
display flashes.
Misread: clean the gauge; reset zero; replace battery when reset zero does not
work.
| Item # | Description | Range | Accuracy |
|---|---|---|---|
| 35-040-025 | IP40, 0-1” Outside | 0-1” / 0-25mm | 0.00015” / 0.003mm |
| 35-040-050 | IP40, 1-2” Outside | 1-2” / 25-50mm | 0.00015” / 0.003mm |
| 35-040-075 | IP40, 2-3” Outside | 2-3” / 50-75mm | 0.00015” / 0.003mm |
| 35-040-100 | IP40, 3-4” Outside | 3-4” / 75-100mm | 0.00015” / 0.003mm |
| 35-040-125 | IP40, 4-5” Outside | 4-5” / 100-125mm | 0.0002” / 0.005 mm |
| 35-040-150* | IP40, 5-6” Outside | 5-6” / 125-150mm | 0.0002” / 0.005 mm |
| 35-040-213 | IP40, 0-3” 3 Piece set | TOTAL 0-3” / 0-75mm | |
| 35-040-214 | IP40, 0-4” 4 Piece set | TOTAL 0-4” / 0-100mm | |
| 35-040-216 | IP40, 0-6” 6 Piece set | TOTAL 0-6” / 0-150mm | |
| 35-040-201 | IP40, 0-1” Double Point | 0-1” / 0-25mm | 0.00015” / 0.003mm |
| 35-040-301 | IP40, 0-1” Micrometer Head | 0-1” / 0-25mm | 0.00015” / 0.003mm |
| 35-040-T01 | IP40, 0-1” Tube Micrometer | 0-1” / 0-25mm | 0.00015” / 0.003mm |
| 35-230E | IP40, 0.3-1.3” Disc Rotor | 0.3-1.3” | 0.00015” / 0.003mm |
| 35-054-401** | IP54, Barrel Tube | 0-1” / 0-25mm | 0.00015” / 0.003mm |
| 35-054-646** | IP54, 0-6” Depth Micrometer | 0-6” / 0-150mm | 0.00015” / 0.003mm |
(0-1”)
35-054-SP1**| IP54, 0-1”Pin Tube Thickness| 0-1” / 0-25mm| 0.00015” / 0.003mm
35-025-USB| Data Output Kit (software included)| (Micro USB & USB plugs)|
(Push button style output)
*Display to show 0.000 when set zero **IP54 Protective Rating
State of California: Proposition65 Warning: Cancer and Reproductive Harm –
www.P65Warnings.ca.gov
©iGAGING 2022
www.iGAGING.com
San Clemente, California