iGAGING 100-164i Dial Calipers Owner’s Manual
- June 4, 2024
- iGAGING
Table of Contents
iGAGING 100-164i Dial Calipers
Please read through this owner’s manual carefully before using the gauge. Use tool properly and only for it’s intended use.
Product Overview
Table
1. Beam
2. Slider (moveable)
3. Slider locking screw
4. Dial bezel
5. Internal measurement
6. Step measurement
7. External measurement
8. Rack
9. Dial locking screw
10. Dial face
11. Thumb wheel
12. Depth measurement
Specifications:
| Item # | Range | Resolution | Accuracy |
|---|---|---|---|
| 100-164i | 0 – 6″ | **** |
1/64“/0.01”
| ****
0.005″
100-164-8| 0 – 8″
100-164-12| 0 – 12″
Operating Instruction:
Avoid exerting excessive force when measuring as it may cause an incorrect reading and deformation of the measuring jaws.
Important Notice:
Take care to avoid contamination of the rack (8) with metal cuttings as it
may damage the rack teeth and the pinion gear. Examine the rack on a periodic
basis and remove any contaminates. Damage to the rack gears will cause
malfunction of the caliper and require repair.
Zero Setting:
Ensure that the dial hand is on zero when the jaws are closed. This can be adjusted by loosening the dial locking screw (9) and rotating the dial bezel (4) until the zero aligns with the dial hand. Relock the dial face (10) by tightening the dial locking screw (9).
Method of Reading: Fractional & Decimal
A measurement is obtained by adding the graduation from the beam (1) scale and
the reading from the dial hand. Dial face (10) reads in both fractional
(black) and decimal (green)
Example:
- Beam reading: 0 0.80″
- Dial reading: 27/32″ 0.085″
- Total: 0 27/32″ 0.885″
Calibration:
It is recommended that this precision measuring tool be calibrated at a periodic interval as follows:
- Annually
- At an interval that ensures that the accuracy is not compromised between calibrations intervals
- As outlined in your company’s quality manual
Normal Care:
Clean all measuring surfaces and the beam (1) with a dry clean cloth prior to the initial use to remove protective oil.
CALIFORNIA PROP 65 WARNING: Products may contain chemicals known to the
State of California to cause cancer and/or birth defects or other reproductive
harm. For more information go to
www.P65Warnings.ca.gov.
Manufacture supplied information. Information may change without notice. Visit
iGAGING.com for more information. © 2022 iGAGING. San Clemente, California USA