iGAGING 100-700-XX-1 OriginCal Absolute Digital Caliper

Parts

1. Measure Beam
2. HD LCD Display
3. Function Keys
4. Battery Compartment
5. Locking Screw
6. SPC 5-PIN Data Port
7. Thumb Roll
8. External Measure Jaws
9. Internal Measure Jaws
10. Depth Measure Rod
11. Depth Rod

Specification

• Reading: 0.0005” / 0.01mm
  *100-700-33,39: 0.0005” / 0.01mm / Inch 128th
• Measuring speed: 3 meter per second
• Protection rating: IP54 splash water and dust protection
• Power: Battery 3V, CR2032; Storage temperature: 0-40°c Operating environment: 0-40°c

Battery Replacement

1. Slide Battery Cover to the right

2. Remove the Battery Rubber Seal

3. Pull out the Battery Tab for battery removal

4. Insert a new CR2032 battery
   Make sure the Battery is facing out / up
   Make sure the Battery Tab is not interfering with the battery contacts Make sure the top part of the Battery Tab is on top of the battery

5. Re-insert the Battery Rubber Seal

6. Slide the Battery Cover to the original position

7. Responsibility recycle the used battery

Item#                                            Range Accuracy

100-700-04                                      0-4”/0-100mm 0.001”/0.02mm

100-700-06,26,28,34,35,36,38,43        0-6”/0-150mm 0.001”/0.02mm

100-700-08,D08                               0-8”/0-200mm 0.0015”/0.03mm

100-700-12,D12                               0-12”/0-300mm 0.0015”/0.03mm

100-700-33*                                     0-6”/0-150mm/128th 0.001”/0.02mm

100-700-37                                      .79-6”/20-150mm 0.001”/0.02mm

100-700-39*                                     0-1.45”/0-37mm/128th 0.001”/0.02mm

Operations

• Press Power to switch the gauge ON or Off. Caliper will auto shut-off within 5 minutes of none use.
• Press mm/in to switch the display reading between measuring units: inch, mm, inch fractional (100-700-33,34,35,36,37,38,39 models)
• Press Origin key to reset origin zero. Origin zero is the absolute zero position for the the caliper. Close the Measure Jaws and press the key to set origin zero.
• Press 0/ABS key to switch between absolute / incremental reading.
• Press the key to enter Incremental mode, and “INC” will show on the display. This gives the user the ability to set an incremental zero.
• Press the key again to exit the mode. Normal reading / measuring will resume. “INC” will disappear from the display.
• Battery: 3V CR3023 (1 Piece)

Precautions

• Do not expose the instruments to direct sunlight or cold temperature.
• Do not attempt to disassemble the caliper for extended period of time.
• Avoid exposure to electromagnetic fields.
• Keep dry when not in use.

DATA OUTPUT OPTIONS

• 100-700-USB: SPC TO USB cable data output kit

• 35-WL-CAD: SPC TO USB wireless dongle data output kit

• 35-BT-28: SPC dongle data output kit to compatible Bluetooth devices

Visit www.iGAGING.com for more information.

References

• iGAGING.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>