Sunsky TG667 Portable Wireless Speaker User Manual

Sunsky TG667 Portable Wireless Speaker

Product Specifications

• Dimensions: 170mm x 83mm x 86.5mm
• Weight : 570g
• Battery Capacity: 1200mAh
• Battery Type : 3.7V Li-ion
• Bluetooth Version : V5.3
• Bluetooth Range: >10 meters
• Output Power : 4/5W
• Frequency Response: 120Hz-18KHz
• Charging Input: 5V/500mA

Product Usage Instructions

Bluetooth Pairing and Playback

• Turn on the speaker and enable Bluetooth on your device.
• Pair the speaker with your device (e.g., mobile phone, tablet) within a range of over 10 meters.
• Once paired, play music on your device, and it will stream through the speaker.

AUX Audio Input:

• Connect the provided AUX cable to the speaker and your audio device (e.g., MP3 player, laptop).
• Select the AUX mode on the speaker to play audio from the connected device.

TF Card and USB Playback:

• Insert a TF card or USB drive with MP3/WAV files into the respective slots on the speaker.
• Use the key functions to control playback, such as play/pause, skip tracks, adjust volume, etc.

FM Radio

• Switch to FM mode and let the speaker auto-scan and save radio channels.
• Use the key functions to search for stations, stop scanning, and control volume.

Hands-Free Calling

• Answer or end calls using the mic button on the speaker when paired with a mobile device.
• Utilize the play/pause button for call management during Bluetooth mode.

FAQ

• Q: How do I charge the speaker?
• A : Use the standard mini USB TYPE-C charging cable to connect to a power source with DC 5V/500mA input.
• Q: Can I play music directly from a TF card?
• A: Yes, you can insert a TF card with MP3/WAV files into the designated slot on the speaker for playback.

Product specifications

• BT : 5.3
• Working distance: 10M
• SNR: >95db
• Battery:3.7V 1200mAh
• Normal volume playing time: 3h
• Speaker driver : ® 52 mm
• Power : 40/5W
• Frequency response: 120 Hz-18KHz
• Unit size: 1708386.5mm
• Unit weight : 402g
•   Charging : 5V/500mA

Product Feature

1. International advanced BT chip and circuit design techniques, support all BT devices;
2. Built-in Low-freq radiators, Super dynamic low-frequency sound pressure gain, listening transparent and flexible.
3. Can play music after pairing with a BT device For example mobile/ MID/ TV, the working distance is more than 10M.
4. Support AUX IN audio input
5. Built-in MP3 decoding, can directly play TF card, U disk
6. Build-in the FM radio module, convenient to auto scan and save radio channels.
7. With Mic for hands-free phone call function.
8. Support TWS

key & slot function

key & slot function

1. TF slot: it can decode and play MP3/WAV format audio when putting a TF card into the slot
2. DC 5V charging slot: use the standard mini USB TYPE-C charging cable for power charging
3. AUX: it can play audio via a 3.5mr AUX cable to the audio device
4. USB slot: it can decode and play MP3/WAV format audio when put USB card into the slot
5. When playing music, press short to open/close the LED flashing light
6. Power switch: Press long for power on /power off; press short to switch model(USB card/TF card/BT FM) and switch to “line in” if via AUX cable to the audio device.
7. When playing music,(USB card/ TF card/LINE IN/BT), short press for “play/pause”. Under BT mode with mobile paired, when a call coming, press short to answer a ca hands-free, press again to hand up press twice to ring up a call. In FM mode, press short to search station automatically, and press again to stop searching. Keep the TWS speaker under BT mode without pairing, press the”play/pause”key for 4 seconds on either of the speakers until hear a hint and meantime the button light stops flashing, now is in TWS mode, then can paire the mobile.
8. When playing music, press short for the next song/next FM station, and press long to turn up the volume.
9. When playing music, press short for the last song/last FM station, and press long to turn down the volume.
   Note: Under FM mode, put in the AUX cable to get a better FM radio station

FCC STATEMENT

Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>