nVent CADDY RPS50H4EG 4 Inch Rooftop Pyramid 50 Foam Based Support Owner’s Manual

nVent CADDY RPS50H4EG 4 Inch Rooftop Pyramid 50 Foam Based Support

Specifications

• Material: Steel; Polyethylene
• Finish: Electrogalvanized
• Static Load Safety Factor: 3:1
• Height (H): 4 inches
• Length (L): 10 3/8 inches
• Width (W): 4 inches
• Static Load (F): 50 lb

Product Information

The ROOFTOP PYRAMID 50 FOAM-BASED SUPPORT, EG, 4 is designed to replace slow and labor-intensive installation methods. It supports pipe, conduit, cable tray, and equipment on roofs and below raised floors. The product allows for an easy increase in load capacity by combining similar nVent CADDY Pyramid supports. It also protects the roof membrane by absorbing shock and vibration without absorbing water. The metal cover shields against weather elements and environmental conditions like bird damage.

Product Usage Instructions

1. Installation: Follow the installation instructions provided by nVent. Ensure proper placement and secure attachment to the designated surface.
2. Load Capacity: Do not exceed the specified static load capacity of 50 lb. Avoid overloading to prevent damage or failure.
3. Maintenance: Regularly inspect the support to ensure it is intact and functioning properly. Clean as needed to maintain performance.

FAQ

• Can I combine different types of supports for increased load capacity?
  It is recommended to combine similar nVent CADDY Pyramid supports to easily increase load capacity without compromising performance.

• How do I protect the roof membrane while using this support?
  The product is designed to absorb shock and vibration, safeguarding the roof membrane. Ensure proper installation and avoid excessive force during use.

FEATURES

• Replaces slow and labor-intensive installation methods
• Supports pipe, conduit, cable tray and equipment on roofs and below raised floors
• Easily increase load capacity by combining similar nVent CADDY Pyramid supports
• Protects the roof membrane while absorbing shock and vibration, without absorbing water
• Metal cover protects against weather and other environmental conditions, such as bird damage

PRODUCT ATTRIBUTES

• Material: Steel;Polyethylene
• Finish: Electrogalvanized
• Static Load Safety Factor: 3:1
• Height (H): 4″
• Length (L): 10 3/8″
• Width (W): 4″
• Static Load (F): 50 lb

DIAGRAMS

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

ABOUT COMPANY

• North America
  • +1.800.753.9221
  • Option 1 – Customer Care
  • Option 2 – Technical Support
• Europe
  • Netherlands: +31 800-0200135
  • France: +33 800 901 793
• Europe
  • Germany: 800 1890272
  • Other Countries: +31 13 5835404
• APAC
  • Shanghai: + 86 21 2412 1618/19
  • Sydney: +61 2 9751 8500

References

• Building a more Sustainable and Electrified World | nVent
• Building a more Sustainable and Electrified World | nVent

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>