MAINSPRING Neo Nixie Desk Digital Clock User Manual

: June 4, 2024
: MAINSPRING

Table of Contents

USING&MAINTENACE
PACKAGE CONTENTS
PRODUCT INTRO
Insert the Number Sheets
OPERATION
SPECIFICATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LONDON
NEO NIXIE
DESK CLOCK

Vintage Nixie Clock Style Over 1600 Colors Various Display Modes High Time Accuracy
user manual

Thanks for purchasing this product. For your own safety, and proper operation/maintenance of this beautiful clock, please read this user manual carefully before using it.
WARNING

Small parts inside, keep away from Children.
Do not drop or impact the product to avoid damaging the solid wood and electronics parts.
Do not disassemble or modify the product.

USING&MAINTENACE

the RGB mu uses LED Lot to output digitals, so it is not suitable for high- intensity of lighting conditions. It is suggested to use in an indoor or dark environment. Please keep the clock away from direct sunlight, or the transparent parts and acrylic numbers sheets will be risky to turn yellow. Clean the clock gently with soft cloth. Do not wipe it with rough tissue.

PACKAGE CONTENTS

RGB clock Main Part – 1PCS, Number Sheets- from 0 to 9, 10 boxes in total , Top Cover – 5PCS, Harwares -1 Pack, Hex Wrench – 1PCS, Screw Driver-lpcs, Micro USB Cable – 1PCS, 5V USB Adapter ( Optional )

PRODUCT INTRO

TIPS: Illustrations of the clock or parts in this manual are for reference only. The actual product may look different from the illustrations due to future product upgrades. Please in kind prevail.

Fosted Groved Plate
Top Cover
Number Sheet
Vertical Column
Solid Wood Base

BUTTON INSTRUCTION:
TIME: Setting Time
MODE: Switching between modes
SET: Set confirm/up
Adjusting brightness/down

HOW TO ASSEMBLE
Before using the RGB Clock, there is a simple assembly job to do. Please read the following instructions carefully before you move forward.
lf you have the pre-assembled version, please skip this process.

Insert the Number Sheets

There are 50pcs number sheets, individually packed in a box. Please remove the protective films on two sides before installing them.
The number sheets are not scratch-proof, please avoid scratching them during installation.
b. Insert the number sheets from 0-9 into the grooved plates one by one. Do not insert them in the wrong direction, or the numbers will be mirrored.

Installation Tips: Peeling the film off from the corner is easier. lf the support columns are not fitting the grooved plates and number sheets well at the moment, just make sure the number sheets are in the correct postion for now. The following steps will fix the problem.

Install Covers
Once you have all the number sheets installed, power the clock up with the supplied USB cable and a DC 5V USB adapater. The clock will start a test mode in the meantime.
If not, pls manually switch it to MODE 7.
Do not continue the installation unless you are sure the number sheets are correctly installed.
Then screw the covers to the support columns with the supplier wrench and screws. Do not tighten them up too hard so as not to damage the covers and columns.

Installation Tips: The support columns are not vertical to the base, simply align them to the cover screw holes and screw them down. After tightening the screws, the problem will be fixed.

OPERATION

Display Modes
The RGB Clock displays at various modes and can be switched via the MODE Button.

MODE 1- Display custom colors
The default color is orange. You can customize the color for each of the digits.
MODE 2- Rainbow gradient colors
All the digits display gradient colors together.
MODE 3- Breathing mode
The brightness of all the digits is fading in/out.
MODE 4- River gradient colors
Display gradient colors from left to right.
MODE 5- Dynamic time All the digits randomly jump and stop.
MODE 6- Setting Digit Animation
Normal or Dynamic. Default is dynamic.
MODE 7 – Testing mode
All the digits run from 0-9 to test if the number sheets are correctly installed.

Setting Time
Enter the time setting menu by pressing the TIME button. When the first group of digits starts blinking, you can adjust the time via the UP/DOWN buttons.
By pressing the TIME button, you can switch between the 6 digits. After finishing setting the time, press the MODE button to save and exist. The clock will return to the previous display mode after existing.
Double pressing the MODE button will exist in the time setting menu without saving.

Setting Color for All the Digits
Enter MODE 2 by pressing the MODE button, and rapidly press a SET button when you see the color you like. The clock will pick the colors for all the digits. Then it will return to MODE 1.
If you find it difficult to pick a satisfactory color, you can set colors for each digit. Please refer to IV. Setting Colors for Each digit. ****

Setting Colors for Each Digits
MODE 1 and MODE 2 support setting individual colors.
When under mode to MODE 1 or 3, press the SET button to enter the color setting menu and the first digit will start blinking. Press the up or down botton to adjust the color and switch between the six digits by pressing the MODE button. When the last digits is blinking, press the MODE button again, and the clock will save the setting and exist. Single press, double press, and long press UP/DOWN buttons allow adjusting the colors range differently. A long press will roughly set colors among different color schemes, a double press will micro-adust the color, and a single press will fine-tune the color.

If you need to set the color the same for all the digits, when you finish picking the color for the first digits, press the MODE button until exit the setting menu.

Setting Digit Animation
Switch mode to MODE 6 by pressing the MODE button, and then press the UP/DOWN button to choose the animation from NORMAL and DYNAMIC.
After finishing choosing the animation, press the MODE button to switch the mode back to your favorite mode.

Reset the Clock
Unplug the power cable, and press and hold the SET button while plugging the power cable back on. When the digits After blu form red release SET button then the clock will better form power was off and on again.
shows 012345 in red, the setting is successfully saved.
The current mode is defaulted for the next power on.
In the current mode, double press the MODE button, if the clock.
If you save the setting under MODE 2, the Plock MOD 2 if it was papered att and on again.