2E AHC2000P Industrial Fan Heater User Manual

: June 13, 2024
: 2E

Table of Contents

2E AHC2000P Industrial Fan Heater
Product Information
WARNING
Special safety regulations
Introduction
Technical specifications
Description of Control Panel
Using Instructions
Cleaning and Maintenance
Trouble shooting
Disposal
Warranty Card
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

2E AHC2000P Industrial Fan Heater

Product Information

The Industrial Fan Heater is a powerful heating device designed for well insulated spaces or occasional use. It features a housing made of steel plate and coated with heat-resistant powder fordurability. The heater is equipped with a self-resetting thermostat and offers a range of heat settings. It also has a fan for assisted heat output.

READ INSTRUCTIONS CAREFULLY: Read and follow all instructions. Place instructions in a safe place for future reference. Do not allow anyone who has not read these instructions to assemble, light, adjust or operate the heater. This product is only suitable for well insulated spaces or occasional use. All indicators of the heating area are valid only under the condition of sufficient thermal insulation of the room where the heat gun will be used.

WARNING

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Children should not play with the device. Cleaning and maintenance by the consumer should not be carried out by children without supervision.
WARNING: To prevent overheating, it is forbidden to cover the heater!
Children under the age of 3 should be kept as far away from the devices as possible if they are not constantly monitored.
Children aged 3 to 8 years can only turn the appliance on/off, provided that the appliance is placed/installed in the normal operating position provided for it. In addition, children should be provided with appropriate supervision or instructions for the safe use of the appliance, and they are aware of the risks of danger that may arise when using the appliance. Children aged 3 to 8 years should not connect the appliance to the power supply network (plug socket), adjust and clean the appliance or perform maintenance work carried out by the user.
CAUTION! Some parts of this product can be very hot and cause burns. Particular attention should be paid to where children and vulnerable people are.

Special safety regulations

Check the integrity of the product before use.
When using electrical appliance basic precautions should always be followed including below:
The fan heater is not suitable for use outdoors in damp weather, in bathrooms or in other wet or damp environments.
Please note that the fan heater can become very hot and should, therefore, be placed at a safe distance from flammable objects such as furniture, curtains and similar.
Do not cover the fan heater.
The fan heater must not be located immediately below a socket outlet.
Do not connect the fan heater using an on/off timer or other equipment which can automatically switch the device on.
The fan heater must not be placed in rooms where flammable liquids or gases are used or stored.
If an extension cord is used, it must be as short as possible and always be fully extended.
You must not connect other appliances to the same mains socket as the fan heater.
Do not use this fan heater in the immediate surroundings of a bath, a shower or a swimming pool. 2.2.10 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Make sure heater is always under surveillance and keep children and animals away from it.
Do not place the appliance on moving vehicles or some where easy to be tipped over.
When you don’t use the appliance for a long time, unplug the appliance. Don’t leave the heater for a considerable amount of time when in use. Pull the plug straight out, never remove the plug by pulling on the cord.
Keep the heater far from curtain or places where the air inlet can easily be blocked.
The power coupler is waterproof when not in use. In order to prevent possible electric shock or leakage current ,never use the appliance with wet hand or operate the appliance when there is water on the power cord.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local government for information regarding the collection systems available. If electrical appliance are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

Introduction

It incorporates a thermostat and a self-resetting thermal cut-out to control the heating elements. The thermostat feels the air temperature and controls the surrounding temperature. The fan motor is controlled by thermostat and it stops working when the thermostat cuts off the heating element. The self- resetting thermal cut-out will switch off the heater to ensure the safety when overheating. When using the heater for the first time, you may notice a slight emission of smoke. This is quite normal and it stops after a short time.

Technical specifications

Model	2E- AHC2000P
Voltage	220-240 V~
required power	2000 W
Frequency	50 Hz
current	8.3-9.1 A
Setting	1050-2000 W
Self-resetting Thermostat	68 °C
Heating area	20 m2
Air output	139 m3/h
Product meas	210×130×260 mm
N.W.	1.45 kg

Description of Control Panel

2E-AHC2000P-Industrial-Fan-Heater-2

Left Knob: selector with heat setting
Right Knob: Thermostat dial

Using Instructions

Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet environments and flammable objects.
Connect the fan heater to the mains.
Set the thermostat knob to the MAX and let the heater operate with full power.
The fan heater will switch on when the heating selector is set to one of the power settings.
Once the room reaches the required temperature, heating element will stop working.Once the temperature decreased, the heating element will be working. The fan heater now starts and stops automatically and thus keeps the room temperature constant.
Before switch off the heater, please turn the thermostat to MIN position and turn the switch to fan position, let the appliance cool down for two minutes then turn off the heater and pull out the plug.

Cleaning and Maintenance

Before cleaning the appliance,disconnect it from the socket and let it cool down. The enclosure is easily to get dirty, wipe it often with soft sponge. For every dirty parts, wipe with a sponge dipped in < 50 °C water and mild detergent,then dry the heater enclosure with clean cloth. Be careful not to let the water enter the appliance inner. Don’t splash water onto the heater,never use solvent like gasoline etc. to clean the heater,in order to protect the enclosure.
Clean the cord and plug,dry and pack it in a plastic bag.
When you store the heater, let it cool down first, keep it dry. Then cover it with a plastic bag, put in a packing box and store it in a dry, ventilated place.

Trouble shooting

You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the service center.

Problem	Possible cause	Treatment

The heater does not operate,even when it is plugged in and the switch, thermostat are switched on .| The plug is loose, bad connection| Pull out the plug, check the connection of the plug and socket. Then connect again.
No power in socket outlet| Insert the plug in a proper socket
The appliance didn’t heat up, or only ventilator worked| The switch was not put at heating setting| Turn the switch to heat setting
The thermostat operated| Turn the thermostat and listen if there is open/close voice. If there is no click and the thermostat is not damaged, the heater will automatic switch on when the appliance cooled down
Manual reset cut-out operated| Turn the heater off and inspect the blockage of inlet or outlet. Disconnect the plug and wait at least 10 minutes for the protection system to reset before attempting to restart the heater.
Abnormal noise| The appliance is not stands upright| Put the heater on a level surface

Disposal

Environmental Protection
Waste electrical production should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

Model identifier(s): 2E-AHC2000P

Warranty Card

Model|
---|---
Name|
Address|
Теl|
Mail|
Name of store|
Buying of the store|
Please fill in all the above items|

This product provides a 24-months warranty service from the date of purchase

If there is a quality problem within the range of normal use, we provide warranty service.
After purchasing our company’s products, please keep this product together with invoices and other items. When maintenance services are needed, please provide information according to our company’s request.
In the case where the warranty is damaged or altered, and no stamp of the sales store on the warranty, the warranty service may be not be provided.
Damage causes by use beyond the normal range of use is not covered by the warranty service.
The content of the warranty scope shall be subject to the content recognized by the company.
Even within the scope of the warranty, sometimes it will be exchanged for products with the same function. The shipping and repair fees for products outside the warranty range shall be paid by the customer.
Sometimes the specifications and functions of the product will be updated without prior notice.

Authorized service center FE «E-R-C»
Address: Marka Vovchka str., 18А, Kyiv, 04073,
Ukraine Tel.: 0 800 300 345; (044) 230 34 84; 390 55 12 www.erc.ua/service