GIANT H-1 Tri Cockpit Clip On Clamp Instruction Manual
- June 24, 2024
- GIANT
Table of Contents
GIANT H-1 Tri Cockpit Clip On Clamp
Product Specifications
- Product Name: TRI COCKPIT CLIP-ON CLAMP
- Material: Aluminum
- Weight: 500g
- Color: Black
Product Usage Instructions
Assembly
- Identify all parts listed in the manual.
- Attach the top cover (Part A) to the bridge (Part D).
- Mount the armrest pads (Part B) onto the armrests (Part C).
- Secure the aero bar extensions (Part G) to the bridge using the provided screws (Parts H-1, H-2, H-3, H-4).
- Attach the upper stem clamp (Part E) and lower stem clamp (Part F) to your bike’s stem.
- Use the T-type nuts (Part N) and screws to secure the assembly in place.
Installation
- Ensure the stem faces inward and do not pinch any cables.
- Use the provided M6 screws and M5 screws to adjust the angles and positions of the aerobar extensions.
- Make sure to follow torque specifications for tightening screws to avoid damage.
- Only use an AL Stem-like CONTACT SL AERO STEM with this product. Do not use a Carbon Stem.
FAQ
- Q: Can this clip-on clamp be used with any type of bike stem?
- A: No, this clip-on clamp must be used with an AL STEM like CONTACT SL AERO STEM. It is prohibited for use with a Carbon Stem.
- Q: How do I adjust the angle of the aerobar extensions?
- A: To adjust the angle of the aerobar extensions, use the provided bowl-shaped washers and spacers along with the appropriate screws to achieve the desired angle.
TRI COCKPIT CLIP-ON CLAMP MANUAL
PARTS
| ITEM | PARTS | QTY | REMARK |
|---|---|---|---|
| A | Top cover | 1 | |
| B | Armrest pad | 2 | |
| C | Armrest | 2 | |
| D | Bridge | 1 | |
| E | Upper stem clamp | 1 | |
| F | Lower stem clamp | 1 | |
| G | Aerobar extensions | 1 | |
| H-1 | Spacer 0° | 1 | |
| H-2 | Spacer 2.5° | 1 | |
| H-3 | Spacer 7.5° | 1 | |
| H-4 | Spacer 12.5° | 1 | |
| I | M6x12 | 4 | 4.7Nm |
| J | M5x16 | 4 | 5Nm |
| K | M6x20, M6x25, M6x30, M6x35 | 8 | 8Nm |
| L | Bowl-shaped washer | 2 | |
| M | Bowl-shaped washer seat | 2 | |
| N | M6 T-type nut | 2 | |
| O | M6x18 | 2 | 8Nm |
Installation And Dimension
| 0mm-0 °| 5mm-0 °| 5mm-2.5 °| 5mm-7.5 °| 5mm-12.5
°| 10mm-2.5 °| 10mm-7.5 °| 10mm-12.5 °
---|---|---|---|---|---|---|---|---
SPACER ANGLE| –| 0°| 2.5°| 7.5°| 12.5°| 2.5°| 7.5°| 12.5°
SPACER HIGH| 0| 5mm| 5mm| 10mm| 10mm| 10mm| 10mm| 10mm
SCREW LENGTH| 20mm| 25mm| 25mm| 30mm| 30mm| 30mm| 35mm| 35mm
STEM#| –| H-1| H-2| H-3| H-4| H-1 + H-2| H-1 + H-3| H-1 + H-4
Notice
- The clamp assembly direction notch faces inward. Don’t pinch the cable.
Notice
- Must use AL Stem (CONTACT SLAERO STEM).
- Prohibited for use with Carbon Stem.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>