GIANT FLOORLAMPBLE Bluetooth RGBICW Floor Lamp User Manual
- June 3, 2024
- GIANT
Table of Contents
FLOORLAMPBLE Bluetooth RGBICW Floor Lamp
User Manual
FLOORLAMPBLE Bluetooth RGBICW Floor Lamp
CONGRATULATIONS
Congratulations! You’ve purchased the Bluetooth RGBICW floor lamp. Please read
the user manual and warnings carefully and keep it for future reference.
Correct installation is required, please follow the instruction step by step.
After installation, this Bluetooth RGBICW floor lamp can be controlled by App
or a touch-sensitive button on the lamp.
PRODUCT OVERVIEW
LAMP ASSEMBLY
- Unpack all lamp parts and layout with the base lying on a steady surface. The LED corner floor lamp consists of six parts: 1 Electric Wire with Adapter, 4Lamp Poles,1* Lamp Base.
- Please arrange the 4 lamp poles in order, the top of C is flat, and there is no distinction between B1 and B2.
- D Insert the male connector of B to the female connector of A, then insert C in the same way
- Plug the adapter into the outlet and now the lamp is ready for use.
This section of the lamp is fixed to the base, please do not screw or pull it
out.| Connect two-pin plugs correctly.| Make sure that the holes are on the
same surface and aligned.
fix it with the screw| Optionally install the other two lamp poles in sequence.| After the installation is complete, connect to the power supply, and the lights will be lit.
Note:
When removing the lamp, you can continue to gently shake the connection to
pull out the lamp, do not pull it violently, which may damage the cable.
For best performance, please adjust the Bluetooth RGBICW floor lamp position,
keep it at a proper distance from you and not affect your walking back and
forth in the room.
OPERATION INSTRUCTION
Manual Operation Step
- Plug the AC adapter into a standard household 110VAC outlet.
- You can quickly control the light through the three buttons of the base.
Short touch to switch colors, 6 RGBICW color modes.
Note:
After the device adapter is connected to the power supply, it will
automatically turn on and connect to the last mode used last time. Normal
shutdown and the adapter will not start automatically when it is in a
continuous power supply state.
Smart Control Operation Step
- Step A: Download the “Smart Life” App
- Please choose either way below to download and install the app. 0 Please scan the QR code below to download the “Smart Life” App:
https://smartapp.tuya.com/smartlife - You can also download “Smart Life” from Apple’s App Store or search for “Smart Life” in the Android application.
- Step B: Create a “Smart Life” Account and Sign in
Open the “Smart Life” App. If you don’t have an APP account, you need to enter the registration page to create an account.
Short touch to switch colors, 6 RGBICW color modes.
Pair the RGBICW floor lamp with the “Smart Life” App
Note: The lamp will automatically drop out of pairing mode if no mobile
device is connected within 3 minutes.
Pair the RGBICW floor lamp with the “Smart Life” App.
RGBICW
Note: Make sure the Bluetooth of the phone is open. And keep the device
close to the phone.
Step one: Open the Bluetooth function of the phone and keep the device close
to the phone. Make sure the device is in pairing mode, the floor lamp will
blink in white. 
Step two: Open the smart life APP, Click
the “+” on the right corner to add a device.
Step three: The app
will scan and find the device, click “Add”.
Step four: Click “+” to star pair.| Step five: Then the floor lamp will be added successfully. Click Done on the homepage.| Homepage
APP functions:
Note: In the process of
using the product, if you encounter problems related to the APP, you can go to
FAQ & feedback for inquiries.
Functions of RF remoter controller
SPECIFICATION
| Product Name | Bluetooth RGBICW floor lamp |
|---|---|
| Material | Aluminum & PC |
| Dimension | 013 X H 1415 CM |
| Rated Power | 12W |
| Input Voltage | AC 100-240V |
| Color of light | Digital RGB+ warm white |
| Max Luminous Flus | 960lm |
| LED Light Source | Digital RGB + warm white. total 72 LEDs |
| Controlled | APPiTouchiRF Remoter controller |
| Waterproof | Indoor Use Only |
SAFETY WARNING
- The RGBICW floor lamp and surrounding parts might get hot after several hours of continuous use, do not place your hands directly on the light.
- Please ensure the stated minimum distance is maintained at all times.
- This product should be kept away from combustible materials (eg. curtains).
- Power off when replacing and cleaning to avoid electric shock.
- Be cautious of static electricity during installation and usage.
- Do not stare at the lamp for a long time.
- Please keep it away from children.
- The product is not water resistant, be cautious when installing and using it.
CUSTOMER SERVICE
We provide a two-year service warranty If there are any questions when you
received the product, please feel free to contact our customer service.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications cations to this device not
explicitly approved by the manufacturer could void your authority to operate
this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.