LITTLE GIANT BSC50V Sump Pumps User Guide
- June 1, 2024
- Little Giant
Table of Contents
LITTLE GIANT BSC50V Sump Pumps
Product Specifications
- Model: BSC50V
- HP: 1/2
- Volts: 115
- Hz: Not specified
- Amps: Not specified
- Watts: Not specified
- Max. Water Temp.: Not specified
- GPM / Liters per Minute @ Height:
- 5′: 64/242
- 10′: 50/189
- 15′: 37/140
- 20′: 24/91
- Shut-Off ft / m PSI / Bar: 28’/8.5m 12.1/0.83
- Item No.: 511252
- Switch Type / Operation: Piggyback Vertical Float
- On Level: 6-8/15.2 cm-20.3 cm
- Off Level: 1.8-3.8/4.6 cm-9.7 cm
- Cord Length: 10′
- Weight: 20/9.1 lbs/kg
Product Usage Instructions
Applications
This sump pump is designed for light effluent or basement sump applications, particularly for wastewater removal in new builder installations.
Features
The BSC50V series sump pump includes a piggyback vertical float switch for easy operation and a durable construction made of epoxy-coated cast iron components.
Construction Details
- Cover: Epoxy Coated Cast Iron
- Motor Housing: Epoxy Coated Cast Iron
- Impeller Design: Vortex Epoxy Coated Cast Iron
- Impeller Material: Epoxy Coated Cast Iron
- Volute: Epoxy Coated Cast Iron
- Mechanical Shaft Seal: Carbon/Ceramic/Nitrile
- Fasteners: Stainless Steel
- Shaft Bearings: Stainless Steel Upper and Lower Ball Bearings
- Power Cord: SJTW
APPLICATIONS
- Light effluent or basement sump application wastewater removal especially for new builder installations
FEATURES
All cast iron construction – Sturdy design for cooling and long life
- Oil Filled PSC motor – Provides plenty of power and efficiency
- Screened intake with 3/8″ solids handling capability- Light effluent, greywater, or sump application flexibility
- Upper and lower ball bearings – Provides quiet and robust operation
- 95°F (35°C) liquid temperature rating – Gives application flexibility
- cCSAus
- 1-1/2″ FNPT discharge
SERIES SPECIFICATIONS
ENGINEERING DATA
PERFORMANCE DATA
CONSTRUCTION
| Cover | Epoxy Coated Cast Iron |
|---|---|
| Motor Housing | Epoxy Coated Cast Iron |
| Impeller Design | Vortex |
| Impeller Material | Epoxy Coated Cast Iron |
| Volute | Epoxy Coated Cast Iron |
| Mechanical Shaft Seal | Carbon/Ceramic/Nitrile |
| Fasteners | Stainless Steel |
| Shaft | Stainless Steel |
| Bearings | Upper and Lower Ball Bearings |
| Power Cord | SJTW |
Warranty
- Technical Support: 1.800.701.7894
- www.littlegiant.com
FAQS
Q: What is the maximum shut-off pressure supported by the pump?
A: The pump can reach a shut-off pressure of 28 feet or 8.5 meters at 12.1 PSI or 0.83 Bar.
Q: What type of switch does the pump have for operation?
A: The pump features a piggyback vertical float switch for easy activation.
Q: What is the recommended application for this sump pump?
A: This sump pump is best suited for light effluent or basement sump applications, especially for wastewater removal in new builder installations.
Q: What material is the impeller made of?
A: The impeller is made of epoxy-coated cast iron for durability and efficiency.
Q: What is the voltage requirement for this sump pump?
A: The sump pump operates at 115 volts.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>