Fosi Audio ZK-1002L Bluetooth Power Amplifier Board User Manual

: June 4, 2024
: Fosi Audio

Table of Contents

Description
Quick steup for ZK-1002L/ZK-502L
Quick steup for ZK-1002/ ZK-502C/ ZK-502T/ZK-1002T
Quick steup for ZK-TB21
ZK-1002
ZK-1002L
ZK-502C
ZK-502L
ZK-502T
ZK-1002T
ZK-TB21
Q&A
About Fosi Audio
- Warranty Information
- Comparison
Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Fosi Audio ZK-1002L Bluetooth Power Amplifier Board User Manual

Description

This manual contains the introduction, installation instructions, and usage methods of five Fosi Audio Bluetooth amplifier boards. Please note that the product model you purchase needs to correspond to this part of the manual. If you have any questions about how to use it, please feel free to contact us.

These Fosi Audio HIFI audio amplifier boards are high-power stereo audio modules with filtering capabilities. 2 CH output and the built-in amplifier module, so it can be directly connected to passive speakers as an amplifier. Also, it is ideal for DIY wireless speakers and transponders.

Quick steup for ZK-1002L/ZK-502L

Connections

Bluetooth Connection

Bluetooth 5.0
Speakers Output

Quick steup for ZK-1002/ ZK-502C/ ZK-502T/ZK-1002T

Connecting Instructions

Audio Connection

3.5MM AUX Input
Speakers Output

Bluetooth Connection

Bluetooth 5.0
Speakers Output

Quick steup for ZK-TB21

Connecting Instructions

Audio Connection

3.5MM AUX Input
Speakers Output

Bluetooth Connection

Bluetooth 5.0
Speakers Output

ZK-1002

Introduction

ZK-1002 Bluetooth 5.0 2 Channel Stereo Amplifier Board has a maximum output of 100watt per channel. Use two TPA3116D2 chips to bring you great HIFI stereo sound quality. With two input methods, you can connect using Bluetooth or 3.5MM audio cable. Suitable for 4Ohm-8Ohm, 50watt-300watt 2 channel passive speakers.

Product Parameters

Model: ZK-1002
Chip: TPA3116D2*2
Input Mode: Bluetooth and 3.5mm AUX
Work Voltage: DC 5V-27V (Above 2A)
Channel: 2 CH Stereo Output
Bluetooth version: Bluetooth 5.0
Bluetooth transmission distance: 50 Ft
MAX Power Output: 100W x 2
Terminating Impedance: 4 Ohm-8 Ohm
Match Speaker: 50watt-300watt
Work Temperature: – 40°C~85°C
Work Humidity: 0%~95%RH
Size: 3.3 2 0.95 inch
Weight: 0.28lb/130g
DC socket: 5.5*2.1mm

Package Includes

ZK-1002 Stereo Bluetooth Power Amplifier Module * 1
Acrylic shell * 2
16mm Copper column * 4
9mm Screw * 8
Steel nut,screw mat * 1
20cm power cable * 1
Screwdriver * 1
Knob * 1

Product Overview

Installation

Step1- Install the bottom acrylic shell
Use the screwdriver to install the bottom 4 counts 9mm screwto connect the copper column, amplifier board, and bottom acrylic shell.
Step2- Install the top acrylic shell
Use the screwdriver to install the top 4 counts 9mm screw to connect the copper column and the top acrylic shell
Step3- Installsteel nut,screw mat, and knob.
Install the steel nut;
Install the screw mat;
Install the volume knob
Adjust the volume switch in the OFF position.
Then insert the volume knob until it fits perfectly with the steel nut.
Note: There is a volume mark, you need to put the volume mark in the six o’clock position to insert the volume knob.

ZK-1002L

Introduction

ZK-1002L Bluetooth 5.0 2 Channel Stereo Amplifier Board has a maximum output of 100watt per channel. Suitable for 4Ohm-8Ohm, 50watt-300watt 2 channel passive speakers.

Product Parameters

Model: ZK-1002L
Input Mode: Bluetooth
Work Voltage: DC 5V-24V (Above 2A)
Channel: 2 CH Stereo Output
Bluetooth version: Bluetooth 5.0
Bluetooth transmission distance: 50 Ft
MAX Power Output: 100W x 2
Terminating Impedance: 4 Ohm-8 Ohm
Match Speaker: 50watt-300watt
Work Temperature:-40°C~85°C
Work Humidity:0%~95%RH
Size: 2.68 2.05 0.83 inch
Weight: 0.26lb/120g
DC socket: 5.5*2.1mm

Product Overview

Package Parameter

ZK-1002L Stereo Bluetooth Power Amplifier Module * 1
Acrylic shell * 2
16mm Copper column * 4
9mm Screw * 8
Steel nut,screw mat * 1
20cm power cable * 1
Screwdriver * 1
Knob * 1

Installation

Step1- Install the bottom acrylic shell
Use the screwdriver to install the bottom 4 counts 9mm screwto connect the copper column, amplifier board, and bottom acrylic shell.
Step2 – Install the top acrylic shell
Use the screwdriver to install the top 4 counts 9mm screw to connect the copper column and the top acrylic shell.
Step3- Installsteel nut,screw mat, and knob
Install the steel nut;
Install the screw mat;
Install the volume knob:
Adjust the volume switch in the OFF position.
Then insert the volume knob until it fits perfectly with the steel nut.
Note: There is a volume mark, you need to put the volume mark in the six o’clock.

ZK-502C

Introduction

ZK-502C Bluetooth 5.0 2 Channel Stereo Amplifier Board has a maximum output of 50watt per channel. Use TPA3116D2 chip to bring you great HIFIstereo sound quality. With two input methods, you can connect using Bluetooth or 3.5MM audio cable. Suitable for 4Ohm-8Ohm, 50watt-200watt 2 channel passive speakers.

Product Parameters

Model: ZK-502C
Input Mode: Bluetooth, AUX
Work Voltage: DC 5V-27V(Above 2A)
Channel: 2 CH Stereo Output
Bluetooth version: Bluetooth 5.0
Bluetooth transmission distance: 50 Ft
MAX Power Output: 50W x 2
Terminating Impedance: 4 Ohm-8 Ohm
Match Speaker: 30watt-200watt
Work Temperature: -40°C~85°C
Work Humidity: 0%~95%RH
Size: 3.2 1.98 0.72 inch
Weight: 0.24lb/111g
DC socket: 5.5*2.1mm

Product Overview

Product Parameters

ZK-502C Stereo Bluetooth Power Amplifier Module * 1
Acrylic shell * 2
12mm Copper column * 4
9mm Screw * 8
Steel nut,screw mat * 1
20cm power cable * 1
Screwdriver * 1
Knob * 1
Heatsink * 1

Installation

Step1- Install the bottom acrylic shell
Use the screwdriver to install the bottom 4 counts 9mm screwto connect the copper column, amplifier board, and bottom acrylic shell.
Step2- Install the heat sink
Paste the heatsink to the chip position of the Bluetooth amplifier board.
Step3 – Install the top acrylic shell
Use the screwdriver to install the top 4 counts 9mm screw to connect the copper column and the top acrylic shell.
Step4- Installsteel nut,screw mat, and knob
Install the steel nut;
Install the screw mat;
Install the volume knob:
Adjust the volume switch in the OFF position.
Then insert the volume knob until it fits perfectly with the steel nut.
Note: There is a volume mark, you need to put the volume mark in the six o’clock position to insert the volume knob.

ZK-502L

Introduction

ZK-502L Bluetooth 5.0 2 Channel Stereo Amplifier Board has a maximum output of 50watt per channel. Suitable for 4Ohm-8Ohm, 50watt-200watt 2 channel passive speakers.

Product Parameters

Model: ZK-502L
Input Mode: Bluetooth
Work Voltage: DC 5V-24V(Above 2A)
Channel: 2 CH Stereo Output
Bluetooth version: Bluetooth 5.0
Bluetooth transmission distance: 50 Ft
MAX Power Output: 50W x 2
Terminating Impedance: 4 Ohm-8 Ohm
Match Speaker: 30watt-200watt
Work Temperature:-40°C~85°C
Work Humidity: 0%~95%RH
Size: 2.17 1.5 0.67 inch
Weight: 0.11lb / 52g
DC socket: 5.5*2.1mm

Product Overview

Package Contents

ZK-502L Stereo Bluetooth Power Amplifier Module * 1
Acrylic shell * 2
14mm Copper column * 4
8mm Screw * 8
Steel nut,screw mat * 1
20cm power cable * 1
Screwdriver * 1
Knob * 1

Installation

Step1- Install the bottom acrylic shell
Use the screwdriver to install the bottom 4 counts 4mm screwto connect the copper column, amplifier board, and bottom acrylic shell.
Step2 – Install the top acrylic shell
Use the screwdriver to install the top 4 counts 4mm screw to connect the copper column and the top acrylic shell.
Step3 – Installsteel nut,screw mat, and knob
Install the steel nut;
Install the screw mat;
Install the volume knob:
Adjust the volume switch in the OFF position.
Then insert the volume knob until it fits perfectly with the steel nut.
Note: There is a volume mark, you need to put the volume mark in the six o’clock position to insert the volume knob.

ZK-502T

Introduction

ZK-502T Bluetooth 5.0 2 Channel Stereo Amplifier Board has a maximum output of 50watt per channel. Use TPA3116D2 chip to bring you great HIFI stereo sound quality. With two input methods and bass and treble control, you can connect using Bluetooth or 3.5MM audio cable. Suitable for 4Ohm-8Ohm, 50watt-200watt 2 channel passive speakers.

Product Parameters

Model: ZK-502T
Input Mode: Bluetooth, AUX
Work Voltage: DC 5V-24V(Above 2A)
Channel: 2 CH Stereo Output
Bluetooth version: Bluetooth 5.0
Bluetooth transmission distance: 50 Ft
MAX Power Output: 50W x 2
Treble and bass control: Yes
Terminating Impedance: 4 Ohm-8 Ohm
Match Speaker: 15watt-100watt
Work Temperature:-40°C~85°C
Work Humidity:0%~95%RH
Size: 3.72.760.83 inch
Weight: 0.34lb/154g
DC socket: 5.5*2.1mm

Product Overview

Package Contents

ZK-502T Stereo Bluetooth Power Amplifier Module * 1
Acrylic shell * 2
14mm Copper column * 4
5mm Copper column mat* 4
4mm Screw * 8
20cm power cable * 1
Screwdriver * 1
Knob * 3
Heatsink * 1

Installation

Step1- Install the bottom acrylic shell
Use the screwdriver to install the bottom 4 counts 4mm screwto connect the copper column, copper column mat, amplifier board, and bottom acrylic shell.
Step2 – Install the heatsink
Paste the heatsink to the chip position ofthe Bluetooth amplifier board.
Step3 – Install the top acrylic shell
Use the screwdriver to install the top 4 counts 4mm screw to connect the copper column and the top acrylic shell.
Step4- Install the knob
Adjust the volume switch to the OFF position. Turn the treble control and bass control switch to the right until the gain is minimal.
Then insert the knob until it completely fits the front panel.
Note: All three knobs have a volume mark, you need to place the mark at the six o’clock position of the knob and then insert the knob.

ZK-1002T

Introduction

ZK-1002T Bluetooth 5.0 2 Channel Stereo Amplifier Board has a maximum output of 100watt per channel. Use TPA3116D2 chip to bring you great HIFI stereo sound quality. With two input methods and bass and treble control, you can connect using Bluetooth or a 3. 5MM audio cable. Suitable for 40hm-80hm. 50watt-200watt 2 channel passive speakers.

Product Parameters

Model: ZK-1002T
Input Mode: Bluetooth, AUX
Work Voltage: DC 5V-24V
Channel: 2 CH Stereo Output
Bluetooth version: Bluetooth 5.0
Bluetooth transmission distance: 50 Ft
MAX Power Output: 100Wx2
Treble and bass control: Yes
Terminating Impedance: 4 Ohm-8 Ohm
Match Speaker: 50watt-300wat
Work Temperature:-40℃~85℃
Work Humidity: 0%~95%RH
Size: 2.763.700.83 inch
Weight: 0.37lb/170g
DC socket: 5.5 2.1mm

Product Overview

Package Contents

ZK-1002T Stereo Bluetooth Power Amplifier Module * 1
Acrylic shell * 2
14mm Copper column * 4
5mm Copper column mat * 4
4mm Screw * 8
Screwdriver * 1
Knob * 3
20cm power cable * 1

Installation

Step1- Install the bottom acrylic shell
Use the screwdriver to install the bottom 4 counts 4mm screwto connect the copper column, copper column mat, amplifier board, and bottom acrylic shell.
Step2 – Install the heatsink
Paste the heatsink to the chip position ofthe Bluetooth amplifier board.
Step3 – Install the top acrylic shell
Use the screwdriver to install the top 4 counts 4mm screw to connect the copper column and the top acrylic shell.
Step4- Install the knob
Adjust the volume switch to the OFF position. Turn the treble control and bass control switch to the right until the gain is minimal.
Then insert the knob until it completely fitsthe front panel.
Note: All three knobs have a volume mark, you need to place the mark at the six o’clock position of the knob and then insert the knob.

ZK-TB21

Introduction

ZK-TB21 Bluetooth 5.0 2.1 Channel Stereo Subwoofer Amplifier Board has a maximum output of 50watt per channel. Use TPA3116D2 chip to bring you great HIFI stereo sound quality. With two input methods and bass and treble control, you can connect using Bluetooth or a 3. 5MM audio cable. Suitable for 40hm- 80hm. 50watt-200watt 2.1 channel passive speakers orsubwoofer.

Product Specifications

Model: ZK-TB21
Input Mode: Bluetooth, AUX
Work Voltage: DC 12V-24V
Channel: 2.1 CH Stereo Output
Bluetooth version: Bluetooth 5.0
Bluetooth transmission distance: 50 Ft
MAX Power Output: 50W*2（R&L）+100W（Subwoofer）
Treble and bass control: Yes
Terminating Impedance: 4 Ohm-8 Ohm
Match Speaker: 50watt-300wat
Work Temperature:-40℃~85℃
Work Humidity: 0%~95%RH
Size: 3.943.940.9 inch
Weight: 0.46lb/210g
DC socket: 5.5 2.1mm

Product Overview

Package Contents

ZK-TB21 Stereo Bluetooth Power Amplifier Module * 1
Acrylic shell * 2
14mm Copper column * 4
5mm Copper column mat * 4
4mm Screw * 8
Screwdriver * 1
Knob * 5
Wire inputsocket * 1
20cm power cable * 1

Installation

Step1- Install the bottom acrylic shell
Use the screwdriver to install the bottom 4 counts 4mm screwto connect the copper column, copper column mat, amplifier board, and bottom acrylic shell.
Step2 – Install the heatsink
Paste the heatsink to the chip position ofthe Bluetooth amplifier board.
Step3 – Install the top acrylic shell
Use the screwdriver to install the top 4 counts 4mm screw to connect the copper column and the top acrylic shell.
Step4- Install the knob
Adjust the volume switch to the OFF position. Turn the treble control and bass control switch to the right until the gain is minimal.
Then insert the knob until it completely fitsthe front panel.
Note: All three knobs have a volume mark, you need to place the mark at the six o’clock position of the knob and then insert the knob.

How to connect the speaker?

Step1- Use the screwdriver to loosen the speaker terminals on the amplifier.
Step2- Insert the speaker wires.
Step3- Install the screwsto secure the speaker wires.

Note:
Your home audio amplifier boards are not water-resistant, so it’s important that they should be kept free of moisture. You should clean only with a dry cloth or tissue and no liquid cleaners or solvents should be used.

Q&A

How to choose a powersupply?

The power adapter for the amplifier board is important. Higher voltage and higher current will bring better output power. If you use a 12V 1A power adapter, the amplifier board can only drive 3-4in speakers. If you use a 19V 5A or higher voltage power adapter, then it can drive 8-10in speakers. We recommend using a good power adapter to work with this amplifier board.
Note : If the power supply voltage is low, the concert will be distorted after turning up the volume. If the current is low, it will not be able to drive your speakers, it may not work properly or the sound quality is not good. When this happens, please replace the larger power adapter.
We recommend using a power adapter higher than 3A for 100watt x 2. 50watt x 2 is recommended to use a power adapter higher than 2A.

How to choose a speaker?

Suitable for 4-8Ohm speakers. If your speaker power is 20watt-50watt, you can also use our power amplifier board, but the specification of the power adapter is preferably below 15V, in order to prevent the speaker from being burned after turning up the volume.
If your speaker power is 50watt-300watt, don’t worry about anything. You can use a 19-24V power adapter, high voltage brings powerful output.

How to choose Bluetooth or AUX audio input mode?

Connect the power adapter, Bluetooth amplifier board and speakers. Turn on the switch of the power amplifier board, the blue indicator light is on. Turn the audio knob to nine o’clock. Use your phone’s Bluetooth to search for “BT- WUZHI”, there will be a beep when the connection is successful. The next time you use the Bluetooth amplifier board, it will automatically connect to your phone.
Note: Please ensure if there another device has paired with this amplifier board. This amplifier board can only be paired with one Bluetooth device at the same time. If another device has paired with it, your device can not pair with it.
If you use 3.5mm AUX input, you need to disconnect Bluetooth. After hearing the beep, insert the audio cable to play music. When using 3.5mm AUX input, if Bluetooth is connected, it will be converted to Bluetooth input.

The sound quality decreases afterturning up the volume.

The power supply cannot drive the speaker. Please replace the power adapter with a higher voltage.

The sound is notsmooth after turning up the volume.

The low current of the power adapter makes the intermittent power failure protection start. Please replace the power adapter with a higher current. Or long-time high-power output, the power amplifier board is overheated, and the overheat protection of the power module is turned on. Turn down the volume or increase its heat dissipation.

About Fosi Audio

Fosi Audio designs and builds innovative audio products with all your music in mind. Great sound, simple but elegant designs, high-quality materials, and truly useful features are what Fosi Audio is about. We sincerely hope you get as much enjoyment from our products as we’ve had to create them!

Our website: www.fosiaudio.com
Amazon store: www.amazon.com/fosiaudio
Our Youtube channel: Fosi Audio
Our Facebook page: Fosi Audio
Whatsapp: +86 17722625601

After-sale Service and Technical Support Email:
[email protected]
[email protected]

Warranty Information

All Fosi Audio products have an 18-month limited warranty on parts and labor from the date of purchase. Please contact us if you have any problems.

What is Covered?
All defective parts or faulty workmanship.

What is Not Covered?
The warranty doesn’t cover damage caused by accident, misuse, abuse, neglect, excessive moisture, lightning, power surges, other acts of nature, unauthorized product modification or repairs, or failure to follow the instructions outlined in this guide.

What We Will Do?
We will repair or replace any defective parts, at our option, within a reasonable amount of time and free of charge any time during the warranty period.

What We Ask From You?
You will be responsible for shipping charges to Fosi Audio or to an authorized dealer. We recommend and you keep the original shipping materials to prevent shipping damage if service is needed. Fosi Audio cannot be responsible for any damages incurred during shipping due to poor packing, so please pack well and make sure to insure your shipment.