Fosi Audio A5 18 Inch Sound Bar User Manual

A5 18-Inch Sound Bar
User Manual

Foreword

Thank you very much for purchasing the A5 home soundbar.
Please read the instructions carefully before using this product.
If you have any problems or suggestions for the product, please contact us via support@fosiaudio.com.

Packing list

Overview

|
---|---
1. HDMI(ARC) input (Some TV brands are not supported)
2. Optical input
3. USB Playback
4. AUX 3.5mm line in
5. DC in| 6. Power
7. M Input mode switch button
8. **Play/Pause
9. — Volume-/Previous track
10. +** Volume+ /Next track

Remote control installation

Insert 2 pieces of AA batteries to activate the remote control. (batteries not included).
Note

1. The remote control works within the range of 6 meters.

2. TV remote control or other universal remote controls are not compatible with the soundbar.

3. Short press: Power on Short press: Power off

4. EQ Switching Setting: Music→Movie→New→Bass

5. Mute

6. Player Control

7. Audio source: Aux-in

8. Audio source: USB

9. Audio source: Optical

10. Audio source: HDMI(ARC) /Some TV models are not supported

11. Audio source: Bluetooth

Note

1. Please connect it to power before using and the soundbar will automatically turn on.
2. The default input setting is Bluetooth mode.
3. The Soundbar will re-enter the Standby mode again if there is no operation for 30 minutes.

Note

1. The default input setting is Bluetooth mode after booting the soundbar. You can click the”M” to switch the input mode or select the mode directly on the remote control. (input mode priority order: “Bluetooth ” > “AUX” > “OPTIC” > “HDMI” > “USB”).
2. Press and hold the “M” on the remote control or “ ****” source button on the soundbar for 2 seconds to remove the Bluetooth connection.

Optical in source

1. Ensure that the soundbar is connected to the TV or other audio devices via an optical cable.
2. Press the “OPTIC “on the remote control to enter the Optical input mode. You can also short press the “M” source button on the soundbar to choose the Optical source.

Note: The playback is controlled by your device and the button on the remote control.
Before use, you need to unplug the cover.

Line in source

1. Ensure that the soundbar is connected to the TV or other audio devices via a 3.5mm/RCA audio cable.
2. Press the “AUX” button on the remote control to enter the mode. You can also short press the “M” source button on the soundbar to choose the LINE IN source.

Note: The playback is controlled by your device or buttons on the remote control.

USB playback

1. Plug your USB flash drive into the USB port and the soundbar will play the music in your USB flash drive.

HDMI(ARC) source

Ensure that the soundbar is connected to the TV or other audio devices via an HDMI(ARC) cable. Press the HDMI button on the remote and play.
Note

1. The device can synchronize the volume with the TV and also with the switch.
2. Some TV brands may not compatible with this interface Protocol.

Wall mounting guide

Mark the position points on the wall

1. Mark the position points on the wall:
   Choose the mounting height and Mark Al; Mark A2 on the right of Al on the same horizontal line; The distance between the 2 points should be 300mm exactly.

2. Drill the holes:
   Drill holes in the marked position.
   

3. Hang up the soundbar:
   Insert the wall plugs into the holes; Tighten the screws into the plugs through the foam pads; Hang the soundbar on the screws.

QA

Q1. Pairing connection via Bluetooth cannot be completed.****

– 1. Once you connect a device to the soundbar, the connection will be stored. When you turn on the soundbar, the Bluetooth connection will be activated automatically. To connect another device to the soundbar, you need to disconnect the former connection first: turning off Blue-tooth on your former device, or clearing the former connection by pressing and holding the Bluetooth button on the remote control for 2 seconds. After that, you can find and connect the other devices.

Q2. Why is there no sound output from the soundbar when I connect it to my TV set?****

– 1. Please make sure that the TV has an audio output interface
– 2. Please set the TV to the digital audio output and select PCM output.

Q3. The Bluetooth connection is not stable.****

– 1. There should be some obstructions between the soundbar and your Bluetooth devices which interfere with the connection. Please remove themThe supported range for the Bluetooth connection is around 10 meters indoors. Please do not exceed that range.

Q4. Silent play after connection via Bluetooth.****

– 1. After connecting with mobile devices, Bluetooth device audio is off. Turn on the mobile’s output volume.

Q5. No sound when connected to the TV via HDMI (ARC) cable.****

– 1. Some TV brands may not be compatible with the HDMI (ARC) interface protocol, it is recommended to use another Audio source.

Specifications

About Fosi Audio

Fosi Audio designs and builds innovative audio products with all your music in mind. Great sound, simple but elegant designs, high-quality materials, and truly useful features are what Fosi Audio is about. We sincerely hope you get as much enjoyment from our products as we’ve had to create them!
Our website: www.fosiaudio.com
Amazon store: www.amazon.com/fosiaudio
Our Youtube channel: Fosi Audio
Our Facebook page: Fosi Audio
After-sale Service and Technical Support Email: support@fosiaudio.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>