Untitled bec96b79 Basin Installation Kit Installation Guide
- June 22, 2024
- Untitled
Table of Contents
Untitled bec96b79 Basin Installation Kit
INSTALLATION GUIDE
Components
INSTALLATION
Installation Steps:
- Add battens to the wall before installation.
- Ensure that the basin is sitting level before fixing it in place.
- Attach bolts to the plasterboard with the following components in order:
- Basin (side)
- Expansion screw plastic
- Bolt
- Metal Washer
- Nut
STEP-1:
Note: Product can be mounted on both concrete or timber-framed walls.
STEP-1:
Lmportant! Before installing, ensure there is sufficient timber framing in the wall to securely fasten your basin to.
STEP-3:
Before fixing the basin in place, ensure that the basin is sitting level.
STEP-4:
Screw a metal nut onto each fixing bolt to secure the basin.
Caution : do not over tighten as this may damage the basin/top.
Specifications
-
Components:
- Basin*1
- Bolt*4
- Nut*4
- Metal Washer*4
- Expansion screw plastic*
-
-
Frequently Asked Questions (FAQ)
Q: How do I ensure the basin is sitting level before installation?
A: Use a spirit level to check the alignment of the basin before fixing it in place. Adjust as needed to ensure it is level.
Q: Can I install the basin without using the expansion screws?
A: It is recommended to use the expansion screws provided for secure installation and stability of the basin.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>