Untitled SG25CX-P2 PV Grid Connected Inverter Installation Guide
- May 15, 2024
- Untitled
Table of Contents
Clean power for all
Quick Installation Guide
PV Grid-Connected Inverter
SG25CX-P2 / SG30CX-P2 / SG33CX-P2 / SG36CX-P2 / SG40CX-P2 /
SG50CX-P2 SG25_30_33 36 40 _50CX-P2-QIMUL-
Ver16-202307
SG25CX-P2 PV Grid Connected Inverter
- Contents may be periodically updated or revised due to product development. The information in this guide is subject to change without notice. In no case shall this guide substitute for the user manual or related notes on the device.
- Make sure to read over, fully understand and strictly follow the detailed instructions of the user manual and other related regulations. Visit http://www.sungrowpower.com/, choose “PV Inverters” and search for the device model on the “Products” tab page to view or obtain the user manual.
- All operations can be performed only by qualified personnel, that must be trained in the installation and commissioning of the electrical system, as well as the dealing with hazards, and should also have the knowledge of the manual and of the local regulations and directives.
- Before installation, check that the package contents are intact and complete against the packing list. Contact SUNGROW or the distributor in case of any damaged or missing components.
- The cable must be intact and well insulated. Operation personnel must wear proper personal protective equipment (PPE) all the time.
- Any violation to the instructions in this quick installation manual or the operation manual could result in personal death or injury or device damage, and will void the warranty.
Safety
Please follow the safety instructions related to the PV strings and the utility grid. Otherwise, SUNGROW shall not be held liable for any damage caused.
DANGER
Lethal voltage!
- PV strings will produce electrical power when exposed to sunlight and can cause a lethal voltage and an electric shock.
- Only qualified personnel can perform the wiring of the PV panels.
- All electrical connections must be in accordance with local and national standards.
- Only with the permission of the utility grid, the inverter can be connected to the utility grid.
- Do not open the enclosure at any time. Unauthorized opening will void guarantee and warranty claims and in most cases terminate the operating license.
- When the enclosure lid is removed, live components can be touched which can result in death or serious injury due to electric shock.
WARNING
All the warning labels and nameplate on the inverter body must be clearly
visible and not be removed, covered or pasted.
CAUTION
Risk of burns due to hot components!
Do not touch any hot parts (such as heat sinks) during operation. Only the DC
switch can safely be touched at any time.
NOTICE
Only qualified personnel can perform the country setting.
Unauthorized alteration of the country setting may cause a breach of the type-
certificate marking.
The symbols on the inverter body are as follows.
| Do not dispose of the inverter together with household waste.| | UKCA mark of conformity.
The height of the label should not exceed 5mm.
---|---|---|---
| CE mark of conformity.
EU/EEA Importer.| | Disconnect the inverter from all the external power
sources before service!
| TUV mark of conformity.| | The inverter does not have a
transformer.
| Danger to life due to high voltages!
Do not touch live parts for 15 minutes after disconnection from the power
sources.
Only qualified personnel can open and maintain the inverter.| | Additional grounding point.
| Check the user manual before service!
| Regulatory compliance mark.
| RoHS labeling
The product complies with the requirements of the applicable EU directives.| |
EU Declaration of Conformity
Within the scope of the EU directives
- Low Voltage Directive 2014/35/EU (L 96/357-374, March 29, 2014) (LVD)
- Electromagnetic compatibility 2014/30/EU (L 96/79-106, March 29, 2014) (EMC)
- Restriction of the use of certain hazardous substances 2011/65/EU (L 174/88,June 8, 2011) and 2015/863/EU (L 137/10, March 31, 2015) (RoHS)
- The radio equipment directive 2014/53/EU (L 153/62, May 22, 2014) (RED)
SUNGROW confirms herewith that the products described in this document are in compliance with the fundamental requirements and other relevant provisions of the abovementioned directives. The entire EU Declaration of Conformity can be found at support.sungrowpower.com.
Radio technology | BLE5.0 |
---|---|
Radio spectrum | 2.4 GHz |
Maximum transmission power | 100 mW |
Scope of Delivery
- The images shown here are for reference. The actual product and quantity are based on delivery.
Mounting location
Dimenson
Mounting
PE Connection
AC Connection (For a multi-core cable)
DC Connection
Communication Module Connection (optional)
The image shown here is for reference only. The actual product you receive may
differ.
WiNet-S Connection (optional)
Installation with WLAN communication
Installation with Ethernet Communication
COM2 (DI, DRM, DO, RS485, Meter)
Take meter Connection as an example.
The images shown here are for reference only. The actual product received
shall prevail.
Inverter parallel
Maximum 30 hybrid inverters with the same type can be connected in parallel.
COM2 Connection (DRM)
The images shown here are for reference only. The actual product received
shall prevail.
Power On
https://file.isolarcloud.com/app_page/html/isolarcloud/download.html
LED Indicator
LED color | State | Definition |
---|---|---|
ON | The device is connected to the grid and operating normally. | |
Fast blink (Period: 0.2s) | The Bluetooth communication is connected and there |
is data communication.
No system fault occurs.
Slow blink (Period: 2s)| The device is in standby or startup state (not
feeding power into the grid).
Slow blink once, fast blink three times| The inverter is performing PID
recovery.
| ON| A fault occurs and the device cannot connect to the grid.
Twinkling| The Bluetooth connection is established, data communication in
process, and a system fault occurs.
| OFF| Both the AC and DC sides are powered down.
More information in the QR code or
at http://support.sungrowpower.com/
Sungrow Power Supply Co., Ltd.
www.sungrowpower.com
QIEN M-H-002922
Documents / Resources
|
Untitled SG25CX-P2 PV Grid Connected
Inverter
[pdf] Installation Guide
SG25CX-P2 PV Grid Connected Inverter, SG25CX-P2, PV Grid Connected Inverter,
Grid Connected Inverter, Connected Inverter, Inverter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>