UNTITLED VGR V-937 Professional Hair Clipper Instruction Manual
- June 14, 2024
- Untitled
Table of Contents
UNTITLED VGR V-937 Professional Hair Clipper
Features
PREPARING FOR USE
- The appliance as supplied by the manufacturer is not yet ready for use. It must be electrically charged prior to use.
- Insert the plug of battery into a socket. Warning! This appliance must be charged at the specified voltage! You can store the remainder the (INPUT: 5V=1) In order to charge the appliance is being charged, the switch must be set at” o” A charging period of 2 hours is required before initial use, Take care to keep the charging contacts 3 clean, as soiled charging contacts can interfere With the charging process. Overcharging of the appliance is not possible.
- After charging, the appliance is ready for use.It can be used with or without the cilp-on comb attachment.To attach the clip-on comb attachment,slide it onto the cutting head I until it clicks into position.The appliance must be switched off while the clip-on comb attachment is being attached or removed.
- The clip-on comb attachment is easily adjustable. Simply slide it up or down the cutting head I. The hair can be cut to 4 different lengths ranging from approximately 1 mm to 3mm, The position of the clip-on comp attachment on the cuttinghead determines the legh of the haircut.
- After using the appliance, swith it off and replace it in the battery charging stand 4 to be recharged the control lanp 5 must light up, In order to retain the load capacity of the storage battery we recommend to use the storage battery until it is empty before reloading.
Using Instructions
How to pick up the limit comb
- Put the blade into the comb limiting grub and press down hard to hear the clicking sound
- Pull up the tail of the limit comb to take out the limit comb.
REPLACING THE CUTTING HEAD
Switch the appliance off before replacing the cutting head!
If the performance of the appliance deteriorates after extended use,despite regular cleaning and maintenance, the cutting head I should be replaced(the cutting head can be ordered as a spare part from the service department). Fist remove the hexagonal screw on the cutting head by means of the hexagonal spanner attached to the underside of the in the direction” -“and remove the old cutting head(Fig.2). Important: First remove the screw, then remove the cutting head! Place the new cutting head on the main body or the appliance and screw with the spanner(direction” +”).
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE OF THE APPLIANCE
- Switch off appliance before cleaning or carrying out maintenance!
- In order to ensurethat the appliance remains in perfect working order, it is important to note the following instructions;
- In order to retain the load capacity Of the storage battery we recommend touse the storage battery until it is empty before reloading.
GUARANTEE
- This appliance is guaranteed against defects for a period of half a year from purchase.
- During that period the purchaser is entitled to free-of-charge correction of any defect.
- This guarantee excludes defects caused by improper handling during use an normal wear and tear.
DISPOSING OF THE BATTERY
When you disard your shaver in due course, please remove the battery Do not throw the battery away with the normal household waste. But hand it in separately at an officially assigned collection point.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>