UNTITLED 212875-09-22 LED Luminaire Instruction Manual
- June 15, 2024
- Untitled
Table of Contents
UNTITLED 212875-09-22 LED Luminaire
Product Information
Specifications:
- Product Name: LED Luminaire
- Model: Art-Nr: 212875-09/22
- Safety Rating: SELV (Safety Extra Low Voltage)
- Dust Resistance: IP5x (non-conductive) or IP6x (conductive and non-conductive)
Safety Information:
Please read and follow the safety instructions below before using the LED
Luminaire:
- Only qualified electricians should handle the installation and maintenance of the luminaire.
- Danger to life due to electric shock. Ensure that all applicable standards and safety regulations are followed.
- Do not attempt to replace or exchange the LED light source by yourself. Contact a qualified technician for any necessary replacements.
- Avoid direct contact with acids, bases, solvents, volatile organic compounds, and oils, as they can damage the LED modules and cause a reduction in luminous output or total failure.
- Ensure proper ventilation to prevent damage from gas release.
- Avoid modifying, reworking, or re-marking the product as it can negatively impact its technical properties and may cause consequential damage.
Operation of the Luminaire:
To operate the LED Luminaire:
- Ensure that the luminaire is properly installed according to the provided instructions.
- Inspect the LED light source regularly for any signs of aging or failure.
- If any LED modules are aged or failed, replace them with new ones. Contact the manufacturer for the appropriate replacements.
- Use suitable cables for the power supply voltage and ensure proper wiring.
- Follow any additional instructions provided with the luminaire for specific operation and control options.
FAQ (Frequently Asked Questions)
-
Q: Can I replace the LED light source by myself?
A: No, the LED light source should not be replaced or exchanged by the user. Contact a qualified technician for any necessary replacements. -
Q: What should I do if the LED light output is reduced or there is a drift in the color of the light?
A: Avoid direct contact with acids, bases, solvents, volatile organic compounds, and oils as they can damage the LED modules. Ensure proper ventilation to prevent damage from gas release. -
Q: Can I modify or rework the product?
A: No, modifying, reworking, or re-marking the product can have a negative impact on its technical properties and may cause consequential damage. The manufacturer cannot be held responsible for damage caused by such changes.
Safety Information
General Safety Information
- Installation, commissioning and maintenance only by qualified electrician.
- Never perform any work on the luminaire with voltage applied. Danger to life due to electric shock!
- Electric connection must be appropriate according to all applicable standards and other national and international safety and accident prevention regulations.
- Damaged luminaires must not be operated.
- Observe and retain safety instructions and mounting instructions
- No liability is accepted for damages resulting from improper use.
- Use genuine parts only for repair.
- Ensure stability of the ceiling and fastening elements.
- The luminaire is exclusively intended for interior rooms and ambient temperatures not exceeding 25°C, unless otherwise described by labeling the luminaire.
Operation of the luminaire
- Abnormal dark spots may be an indication of partial failure of LEDs. Inspect regularly and replace the luminaires affected. The light source (LED) of this luminaire must not be exchanged or replaced by the user.
- Exceeding the permissible ambient temperature will reduce the luminaire’s lifecycle, resulting in premature failure in extreme cases.
- Avoid condensation of the luminaire.
- Any mechanical load to the LED circuit boards is not permitted.
- LEDs can be damaged by electrostatic discharge (ESD). This may result in total failure. Always avoid direct contact.
- Depending on their concentration, chemicals can corrode the LED modules and lead to reduction of luminous flux, drift of luminous colour and/or total failure. Always avoid direct contact with acids, bases, solvents, volatile organic compounds and/or oils. Ensure sufficient ventilation to prevent damage by gas release.
- Avoid ESD problems by not routing feed-through wiring directly along the wiring of the luminaire.
- Connect control inputs of dimmable luminaires with standard cables suitable for power supply voltage.
Changes to our products
Modification, reworking, re-marking of products can have a negative impact on
their technical properties, destroy them and possibly cause consequential
damage to other objects. The manufacturer cannot be held responsible for
damage caused by such changes.
- + IP5x – dust nonconductive
- + IP6x – dust conductive and dust nonconductive
Cleaning and Disposal
Information for service, cleaning and disposal of luminaire:
Instruction for luminaire service:
- Instruction for end of life:
- Instruction for luminaire cleaning
Documents / Resources
|
UNTITLED 212875-09-22 LED
Luminaire
[pdf] Instruction Manual
212875-09-22 LED Luminaire, 212875-09-22, LED Luminaire, Luminaire
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>