INR 230901 Tall Cabinet Grand Grip Instructions
- June 21, 2024
- INR
Table of Contents
INR 230901 Tall Cabinet Grand Grip
SAFETY REGULATIONS
- Goggles are recommended to protect your eyes.
- We recommend that two persons be present at the installation.
- Use safety shoes during installation.
- Note! Always set the furniture down on a soft foundation, since edges and corners are very delicate.
- Screw fastenings should be made in concrete or other solid structures (a), wooden studs, wooden noggings (b), or in structures that have been tested and approved for fastenings, for example, sheet construction (c).
- Requirements for sealing apply in wet zones 1 and 2. See examples of construction at säkervatten.se.Sealing materials must be fixed to the underlying layer and must be waterproof, mold-resistant, and age-resistant.
Dimension
TOOLS
INSTALLATION
MAINTENANCE
- To learn more, please visit inr.se
- If in doubt regarding your choice of cleaning method, test first on a small, inconspicuous area.
WASHBASIN, PORCELAIN
- Clean with a slightly damp cloth and a mild cleaning agent. Avoid hard abrasives and caustic soda.
WASHBASIN, COMPOSITE STONE
- To ensure a long-lasting matte effect, you are recommended to clean the entire wash basin annually with the supplied abrasive cloth. If you need to buy a new one, we recommend a red, medium abrasive cloth.
- Remove nail polish, hair dye, coffee, and wine stains immediately. The wash basin should not be subjected to water exceeding 65°C because cracking may occur. Do not place hot objects directly on the surface.
- Avoid contact with aggressive detergents, acids, ammonia, chlorine, and other highly corrosive products. Avoid the use of sharp objects that could damage the surface.
LACQUERED WOODEN SURFACES
- Cupboard doors, drawers, and frames can be cleaned with a slightly damp cloth and mild detergent. Avoid the use of furniture polish, scourers, abrasive cleaning agents, ammonia, or other strong solvents.
- Water and splashes should be wiped off immediately with a dry cloth.
METAL SURFACES
- For metal surfaces, use a slightly damp cloth and a mild detergent solution.
WARRANTY
- See inr.se
RECYCLING
- Metal, wood, and glass are separated and recycled separately.
- INR SUOMILINNATULLINKATU 1 LT 102 600 ESPOOSUOMI010 209 3300[email protected]
Read User Manual Online (PDF format)
Loading......