INR GRAND WALNOT Room Case Study User Manual

: June 4, 2024
: INR

Table of Contents

References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INR GRAND WALNOT Room Case Study User Manual

INR GRAND WALNOT Room Case Study User Manual

SAFETY REGULATIONS

Goggles are recommended to protect your eyes.

We recommend that two persons are present at the installation.

Use safety shoes during installation.

Note! Always set the furniture down on a soft foundation, since edges and corners are very delicate.

INR GRAND WALNOT Room Case Study - Screw fastenings should be made in
concrete or other solid

Screw fastenings should be made in concrete or other solid structure (a), wooden studs, wooden noggings (b) or in structures that have been tested and approved for fastenings, for example a sheet construction (c). Requirements for sealing apply in wet zones 1 and 2. See examples of construction at säkervatten.se. Sealing materials must be fixed to the underlying layer and must be waterproof, mould-resistant and age-resistant.

INR GRAND WALNOT Room Case Study - overview

TOOLS

INR GRAND WALNOT Room Case Study - TOOLS

INSTALLATION

INR GRAND WALNOT Room Case Study - Figure 1

INR GRAND WALNOT Room Case Study - Figure 2

INR GRAND WALNOT Room Case Study - Figure 3

INR GRAND WALNOT Room Case Study - Figure 4

INR GRAND WALNOT Room Case Study - Figure 5, 5.1

INR GRAND WALNOT Room Case Study - Figure 5.2

INR GRAND WALNOT Room Case Study - Figure 5.3

INR GRAND WALNOT Room Case Study - Figure 5.4

INR GRAND WALNOT Room Case Study - Figure 5.5

INR GRAND WALNOT Room Case Study - Figure 5.6

INR GRAND WALNOT Room Case Study - Figure 6

INR GRAND WALNOT Room Case Study - Figure 7, 7.1

INR GRAND WALNOT Room Case Study - Figure 7.2

INR GRAND WALNOT Room Case Study - Figure 7.3

INR GRAND WALNOT Room Case Study - Figure 8

SOFT-CLOSE

PUSH TIPMATIC

INR GRAND WALNOT Room Case Study - PUSH TIPMATIC

INR GRAND WALNOT Room Case Study - Figure 9

INR GRAND WALNOT Room Case Study - Figure 9 2

INR GRAND WALNOT Room Case Study - PUSH TIPMATIC 2

Maintenance advice

To learn more, please visit inr.se
If in doubt regarding your choice of cleaning method, test first on a small, inconspicuous area.

Washbasin, porcelain

Clean with a slightly damp cloth and a mild cleaning agent. Avoid hard abrasives and caustic soda.

Lacquered wooden surfaces

Cupboard doors, drawers and frames can be cleaned with a slightly damp cloth and mild detergent. Avoid the use of furniture polish, scourers, abrasive cleaning agents, ammonia or other strong solvents. Water and splashes should be wiped off immediately with a dry cloth.

Countertop Quarts Composite

A few times a year: use Cif with a damp cloth or small sponge (non-abrasive) for more intensive cleaning. Remove heavy soiling and stains as soon as possible. Avoid contact with acetone and aggressive cleaning agents such as metal polish, drain cleaner and other corrosive substances, do not use detergents with ph value < 4 or > 10. For daily cleaning use damp cloth and a mild detergent

Metal surfaces

For metal surfaces, use a slightly damp cloth and a mild detergent solution.

Warranty

See inr.se

RECYCLING

Metal, wood and glass are separated and recycled separately.

INR Sverige

Kosterögatan 15
211 24 Malmö
Sverige
Tel 0200-38 40 40
[email protected]
www.inr.se

INR Norge

Fjordgaten 13 A
3125 Tønsberg
Norge

Tel +47 33 33 02 00

[email protected]
www.inr.no

INR Danmark
Kosterögatan 15
211 24 Malmö
Sverige
Tel +45 33 60 31 10
[email protected]
www.inr.dk