INR Tall Cabinet Air Wood 40 Instruction Manual

June 3, 2024
INR

INR Tall Cabinet Air Wood 40

INR-Tall-Cabinet-Air-Wood-40-PRODUCT

SAFETY REGULATIONS

  • Goggles are recommended to protect your eyes.
  • We recommend that two persons are present at the installation.
  • Use safety shoes during installation.
  • Note! Always set the furniture down on a soft foundation, since edges and corners are very delicate.

Screw fastenings should be made in concrete or other solid structure (a), wooden studs, wooden noggings (b) or in structures that have been tested and approved for fastenings, for example a sheet construction (c). Requirements for sealing apply in wet zones 1 and 2. See examples of construction at säkervatten.se. Sealing materials must be fi xed to the underlying layer and must be waterproof, mould-resistant and age-resistant.INR-Tall-Cabinet-Air-
Wood-40-FIG0-1 INR-Tall-Cabinet-Air-
Wood-40-FIG0-2 INR-Tall-Cabinet-Air-
Wood-40-FIG0-3

TOOLS

INR-Tall-Cabinet-Air-Wood-40-FIG0-4
INSTALLATIONINR-Tall-Cabinet-Air-Wood-40-FIG0-5 INR-Tall-
Cabinet-Air-Wood-40-FIG0-6 INR-Tall-Cabinet-Air-
Wood-40-FIG0-7 INR-Tall-Cabinet-Air-
Wood-40-FIG0-7 INR-Tall-Cabinet-Air-
Wood-40-FIG0-7 INR-Tall-Cabinet-Air-
Wood-40-FIG0-7 INR-Tall-Cabinet-Air-
Wood-40-FIG0-11 INR-Tall-Cabinet-Air-
Wood-40-FIG0-12 INR-Tall-Cabinet-Air-
Wood-40-FIG0-13 INR-Tall-Cabinet-Air-
Wood-40-FIG0-14

MAINTENANCE ADVICE

To learn more, please visit inr.se
If in doubt regarding your choice of cleaning method, test first on a small, inconspicuous area.

Lacquered wooden surfaces
Cupboard doors, drawers and frames can be cleaned with a slightly damp cloth and mild detergent. Avoid the use of furniture polish, scourers, abrasive cleaning agents, ammonia or other strong solvents. Water and splashes should be wiped off immediately with a dry cloth.

Glass and metal surfaces
For mirrors and glass surfaces, use nonabrasive glass polish and a cloth. For metal surfaces, use a slightly damp cloth and a mild detergent solution.

WARRANTY

See inr.se

RECYCLING
Metal, wood and glass are separated and recycled separately.

Fjordgaten 13 A 3125 Tønsberg Norge
Tel +47 33 33 02 00
info@inr.no
www.inr.no

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals