INR Viskan Classic 40 Several Wash Basins Instruction Manual

June 1, 2024
INR

INR Viskan Classic 40 Several Wash Basins

INR-Viskan-Classic-40-Several-Wash-Basins-product

Specifications

  • Product Name: VISKAN 40
  • Model Number: 2023/09/01
  • Power: 230W
  • IP Rating: IP21
  • Dimensions: A – 20mm x 50mm, B – 606mm x 580mm, C – 870mm

Product Usage Instructions

Safety Regulations Always follow the safety regulations provided in the manual before using the product.

Tools Ensure you have all the necessary tools required for installation as listed in the manual.

Installation

  1. Refer to the installation section in the manual for step-by-step instructions.
  2. Make sure to follow the specified zones for installation based on IP ratings.
  3. Take proper measurements for accurate placement of the product.

Maintenance Follow these maintenance tips:

  • Clean washbasin porcelain with a slightly damp cloth and mild cleaning agent.
  • For composite stone washbasins, use appropriate cleaning methods recommended in the manual.
  • For lacquered wooden surfaces and metal surfaces, use mild detergents and avoid harsh chemicals.

Frequently Asked Questions

Q: Where can I find warranty information? A: Warranty details can be found on the official website. Refer to the specific link provided in the manual for your region.

Q: How should I clean metallic surfaces? A: Use a slightly damp cloth with a mild detergent solution for cleaning metal surfaces.

Q: What should I do in case of doubt about cleaning methods?A: Test the cleaning method on a small, inconspicuous area before applying it to the entire surface.

Q: How should I handle water splashes on wooden surfaces? A: Wipe off water and splashes immediately with a dry cloth to prevent damage to lacquered wooden surfaces.

SAFETY REGULATIONS

  • Goggles are recommended to protect your eyes.
  • We recommend that two persons are present at the installation.
  • Use safety shoes during installation.
  • Note! Always set the furniture down on a soft foundation, since edges and corners are very delicate.

Screw fastenings should be made in concrete or other solid structure (a), wooden studs, wooden noggings (b) or in structures that have been tested and approved for fastenings, for example a sheet construction (c). Requirements for sealing apply in wet zones 1 and 2. See examples of construction at säkervatten.se.Sealing materials must be fi xed to the underlying layer and must be waterproof, mould-resistant and age-resistant.

INR-Viskan-Classic-40-Several-Wash-Basins-fig-6

INR-Viskan-Classic-40-Several-Wash-Basins-fig-7

TOOLS

INR-Viskan-Classic-40-Several-Wash-Basins-fig-8

INSTALLATION

INR-Viskan-Classic-40-Several-Wash-Basins-fig-9 INR-Viskan-Classic-40-Several-Wash-Basins-fig-10 INR-Viskan-Classic-40-Several-Wash-Basins-fig-11 INR-Viskan-Classic-40-Several-Wash-Basins-fig-12 INR-Viskan-Classic-40-Several-Wash-Basins-fig-13 INR-Viskan-Classic-40-Several-Wash-Basins-fig-14 INR-Viskan-Classic-40-Several-Wash-Basins-fig-15 INR-Viskan-Classic-40-Several-Wash-Basins-fig-16

To learn more, please visit inr.se
If in doubt regarding your choice of cleaning method, test first on a small, inconspicuous area.

WASHBASIN, PORCELAIN

Clean with a slightly damp cloth and a mild cleaning agent. Avoid hard abrasives and caustic soda.

WASHBASIN, COMPOSITE STONE
To ensure a long-lasting matte effect, you are recommended to clean the entire wash basin annually with the supplied abrasive cloth. If you need to buy a new one, we recommend a red, medium abrasive cloth. Remove nail polish, hair dye, coffee and wine stains immediately. The wash basin should not be subjected to water exceeding 65°C because cracking may occur. Do not place hot objects directly on the surface. Avoid contact with aggressive detergents, acids, ammonia, chlorine and other highly corrosive products. Avoid the use of sharp objects that could damage the surface.

LACQUERED WOODEN SURFACES
Cupboard doors, drawers and frames can be cleaned with a slightly damp cloth and mild detergent. Avoid the use of furniture polish, scourers, abrasive cleaning agents, ammonia or other strong solvents. Water and splashes should be wiped off immediately with a dry cloth.

METAL SURFACES
For metal surfaces, use a slightly damp cloth and a mild detergent solution.

WARRANTY
See inr.se

RECYCLING
Metal, wood and glass are separated and recycled separately.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

INR User Manuals

Related Manuals