SCOSCHE 142SQSPBWT 3-in-1 MagSafe Compatible Folding Charge Stand Instruction Manual

: June 14, 2024
: Scosche

Table of Contents

SCOSCHE 142SQSPBWT 3-in-1 MagSafe Compatible Folding Charge Stand
INCLUDED ELEMENTS
DEVICE SETUP
REMOVEABLE POWERBANK
USING MAGICMOUNT BASE PRO
SPECIFICATIONS
FCC Compliance Statement
MagicMount Base Pro How-To Video…
Specifications:
FAQ:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SCOSCHE 142SQSPBWT 3-in-1 MagSafe Compatible Folding Charge Stand

INSTRUCTION MANUAL

3-in-1 MagSafe® Compatible FFolding Charolding Charge Sge Standtand with Rwith Removable emovable WirWireleseless Ps Power Bankower Bank

INCLUDED ELEMENTS

A. MagSafe® CMagSafe® Compaompatible Chartible Chargerger for iPhone 12 and Lafor iPhone 12 and Laterter
B. Charging Stand (folds for travel)
C. Removable Magnetic Wireless Power Bank
D. Cable Routing Channel
E. Illuminated Base with Touch Control
F. Slide-On Holder for Apple Watch® Magnetic Fast Charger to USB-C (charger not included)
G. Power Adapter Input (48W power adapter with 5 ft. cable included)
H. 15W USB-C Charge Port
I. MagicRing MagicRingTM Adapter
J. Mounting Template
K. Cleaning Wipe

DEVICE SETUP

Getting Started

Unfold the charging stand (A). Connect the included power adapter to the unit (B), and plug the adapter into a , wall socket. The unit will power on automatically

Illuminated Base with Touch Control Touch anywhere on the stand’s neck (C) to control the light as follows:

Turn light on/off: Tap once

Increase/decrease brightness: Tap and hold

Hold 5 seconds for low to high or high to low
Disable light feature: Tap and hold for 10 seconds
Light feature will not resume function until enabled*

*Enable light feature: Tap and hold for 5 seconds

Note: The light feature does not indicate if the phone is charging or charged.

Use the battery indicator on the phone’s screen to check charge status.

Slide-On Holder for Apple Watch®

Note: For use with Magnetic Fast Charger to USB-C (not included).

1. Route the charger cable through the opening in the holder (A), and slide the holder onto the charging stand (B).
2. Seat the magnetic charger in the holder (C), and route the charger cable into the guide channels in the holder and in the back of the stand (D).
3. Plug the charger cable into the USB-C port (E).

REMOVEABLE POWERBANK

Use the base to charge the powerbank*.
Remove powerbank from base as shown (A).

1. Charging Contacts
2. Charge Level Button (Press to display charge level LEDs).
3. USB-C Input/Output Charge Port
4. Charge Level LEDs (4 LEDs Illuminate in sequence to show charge level.)
5. Wireless Charge Area

*For optimal performance, fully charge power bank to 100% before use.

B. iPhone 12 or Later (with optional MagSafe Case) If using a case, it must be a MagSafe case (not included) for GoBat to function properly

C. iPhone 12 or Later (without Case)

USING MAGICMOUNT BASE PRO

Folding Charge Stand

**MagicRing Installation on Non-MagSafe Devices***

*Case required. Manufacturing materials do not allow adhesives to bond directly to the device.

Clean the surface of the case using the supplied wipe. Use included template to accurately position MagicRing on device

Foreign Object Detection (FOD)
If a metal object is detected on either wireless charger (stand or base) the light surrounding the base will pulse slowly*. When the object is removed, normal function will resume.

*Note: The FOD light pattern functions even if the light feature has been disabled (see previous section).

SPECIFICATIONS

Charging Stand

Input:12V 4A, 48W
Wireless: 5W / 7.5W / 10W
Pogo Pin: 9V 1.5A, 13.5W
USB-C: 5V 3A, 15W
LED Light: 3.5W

Removable Powerbank

Battery Capacity: 5,000 mAh
USB-C Input: 5V 2A
USB-C Output: 5V 2A
Wireless Output: 10W Max.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference.(2) This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.