Aerpro FP9680PK Double DIN Facia Kit User Manual

Aerpro FP9680PK Double DIN Facia Kit

Inclusions

• 1x Double DIN facia kit
• 1x Top dash panel
• 1x Main harness
• 1x Video harness
• 1x Built-in HVAC and steering wheel control unit
• 1x Universal SWC patch lead
• 1x Antenna adapter
• 1x Mounting bracket
• 1x Mag Mate metal plate
• 1x Factory park tone retention module
• 1x Factory subwoofer retention lead
  

Infodapter Controls

Steering Wheel Controls

Button Functions

1. Temperature UP
   (Passenger side)

2. Interior light ON/OFF

3. Dynamic stability
   control ON/OFF

4. Door unlock

5. Hazard button

6. Door lock

7. Rear demister
   (Push & hold for
   parking aid activation
   and deactivation)

8. Front demister

9. Temperature UP
   (Drivers side)10.

10. Temperature DOWN
    (Passenger side)

11. Air circulation

12. Auto climate control

13. Fan speed
    UP/ Menu Navigation

14. System menu

15. Fan speed
    DOWN / Menu Navigation

16. Air conditioner
    ON/OFF

17. Mode

18. Temperature DOWN
    (Drivers side)

19. Temperature Sensor

20. Seek

21. Volume UP

22. Mode

23. Volume Down

24. Phone (No longer retained)

25. Voice Command button
    -Short press to answer.
    -Long press to hang up
    NOTE: The voice command button has be re-assigned to answer and hang up calls

NOTE: The Infodapter video output is NTSC by default.

Interface Functions

Front Demister
Fresh air is blown through the heater core and then ducted to and distributed over the interior surface of the vehicles windshield

• BUTTON

  ---

• SCREEN DISPLAY
  

• MFD

Rear Demister
The demister clears condensation from the rear window

• BUTTON
  Push & Hold to activate and deactivate parking aid

• SCREEN DISPLAY

• MFD
  

Air Circulation Mode
Changes between fresh air drawn in directly from the outside of the vehicle, or recirculation where the air is drawn from inside the cabin

• BUTTON

• SCREEN DISPLAY
  

• MFD

Mode
Changes the vent positions for heating and cooling

Heating & Cooling Temperature
To increase temperature press up, to decrease temperature press down. Left hand side buttons adjust passenger side temperature settings. Right hand side buttons adjust drivers side temperature settings. Push & hold the Auto button to reset back to single zone. External temperature icon is in the top middle

Air conditioning On or Off
Press to turn the air conditioning On/Off or vice versa. This can be changed and reversed in the setup menu. Note : Holding down the A/C button completely turns the A/C heating and cooling system Off.

• BUTTON

• SCREEN DISPLAY
  

• MFD

Fan Speed Adjustment
Pressing these will turn the fan speed up and down. Note: Adjusting fan speed will also switch from auto to semi-auto climate control.

Auto Function
Press to automatically set the climate control to maintain a specified temperature.

Auto Function (Semi Auto)
Adjusting the fan speed will also switch from auto to semi-auto climate control.

Door Unlock/Lock
Press to lock and unlock all doors in the vehicle

Dynamic Stability Control
Press to turn Dynamic Stability Control (vehicles traction control) on or off.

Interior Light
Press to turn the vehicles factory interior light on or off

Hazard Flasher Warning Light
Press to turn the vehicles hazard emergency light on or off

Menu Functions

Configuration Menu
Press and hold the menu button for a few seconds to display the Configuration Menu. Press the Fan UP/DOWN buttons to navigate up and down between sub menus. Press menu button to enter into sub menus and again to change settings.

Menu Functions (Infodapter Settings)
Select Infodapter Settings/Preferences to access sub menus.

Menu Functions (Infodapter Settings Continued)

Climate Screen Timeout
Adjusts the time it takes the Infodapter screen to return to the Headunit Screen, by pressing the fan Up & Down buttons, select between 3 – 30 seconds

A/C Panel Brightness (Day mode)
Adjusts the brightness of the LED’s on the Infodapter, by pressing the fan Up & Down buttons, select between 5% – 100%

A/C Panel Brightness (Night mode)
Adjust the brightness of the LED’s on the Infodapter, by pressing the fan Up & Down buttons, select between 5% – 100%

Reverse Priority
Allows the selection of either the camera video feed or the park assist image when the vehicle is in reverse. Switchable via steering wheels MODE button. (Only appears in the menu if the camera connection setting is turned ON)

Rear Camera Delay
The camera image is displayed upon shifting out of Reverse (R) until the vehicle speed reaches 8 km/h. This occurs when the rear camera delay feature is on.

Restore Factory Settings
Restore all infodapter settings to default

Menu Functions (Infodapter Settings)

Installer Menu
When in the Configuration menu, press and hold the fan UP & DOWN buttons at the same time to access the installer menu

Air Conditioner Type
Choose between a single or dual climate system. Note: Dual climate systems can run as a single zone system

Screen Size/ Position
Allows the user to change the Infodapter screen to fit to your headunits display

Camera Connected
Turns the reverse camera function On or Off. Note: must be set to “Yes”

Diagnostics
Information on the system to check the vehicle is communicating with the Infodapter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>