V I V O DESK-KIT-F10BD 30 Quad Motor Electric 4 Leg Desk Instruction Manual
- June 13, 2024
- V I V O
Table of Contents
- V I V O DESK-KIT-F10BD 30 Quad Motor Electric 4 Leg D
- Product Information
- Product Usage Instructions
- FAQs
- PRECAUTION
- Package Contents
- Tools Needed
- ASSEMBLY STEPS
- Remote Instructions
- Control Panel Instructions
- Troubleshooting
- CONTACT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
V I V O DESK-KIT-F10BD 30 Quad Motor Electric 4 Leg D
Product Information
- Specifications:
- Color: Black & Dark Walnut
- Dimensions: 71″ x 30″
- Motor: Quad Motor Electric
- Legs: 4-Leg Desk
- Weight Capacity: 264lbs (120kg) without desktop, 220lbs (100kg) with desktop
Product Usage Instructions
- Package Contents:
- (x4) Leg
- (x1) Long Crossbar with Control Panel
- (x2) Dark Walnut Panels
- (x1) Black Center Panel
- (x1) Long Crossbar
- (x2) Short Crossbar
- (x1) Control Unit
- (x1) Power Adapter
- (x1) Remote
- (x6) Connector Brackets
- (x8) Cable Clips
- (x2) Extension Cable
- (x1) Power Cable
- Assembly Steps:
- Install two Legs (A) onto Long Crossbar (C) using M8x42mm Screws (S-A) and a 5mm Allen Wrench (T-A).
- Install a Short Crossbar (D) to the side of the previously installed Leg (A), using M8x42mm Screws (S-A) and 5mm Allen Wrench (T-A). Install a third Leg onto the end of the Short Crossbar.
- Install Long Crossbar with Control Panel (B) onto the frame assembly using M8x42mm Screws (S-A) and 5mm Allen Wrench (T-A). Install the remaining Leg (A) onto the end of the Long Crossbar with Control Panel.
- Install the remaining Short Crossbar (D) onto the frame assembly using M8x42mm Screws (S-A) and 5mm Allen Wrench (T-A).
- Orient the Dark Walnut and Black Panels (E, F) as shown and secure the Panels using Connecting Plates (L), ST5x20mm Screws (S-B), and a Phillips screwdriver or Drill.
- Tools Needed:
- Phillips Screwdriver
- Power Drill
- Weight Capacity:
- Make sure not to exceed weight capacity to avoid serious injury. The desk can hold up to 264lbs (120kg) without the desktop and 220lbs (100kg) with the desktop.
FAQs
What should I do if I'm missing a part or a part is damaged?
If any parts are received damaged or defective, or if you are missing a part, please reach out to customer support within 30 days of product delivery for a free replacement.
Is adult supervision required for this product?
Yes, adult supervision is required as there are small parts that may pose a choking hazard for children under 3 years.
What is the warranty for this product?
For the most up-to-date details on your product's warranty, please visit the product listing on our website or contact customer support.
What is the return policy?
We offer a hassle-free 30-day return on all products. Contact customer support for assistance with returns.
PRECAUTION
CAUTION!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo- us.com. for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
- WARNING: CHOKING HAZARD
- SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
- DO NOT EXCEED WEIGHT CAPACITY
- FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.
- Product Warranty
- For the most up-to-date details on your product’s warranty, please visit the product’s listing on our website or reach out to customer support. vivo-us.com/products/desk-kit-f10bd.
- Returns | Product Didn’t Work Out?
- We offer a hassle-free 30-day return on all products. Contact customer support at 309-278-5303 or help@vivo-us.com.
- Please note: For items ordered in error or no longer needed, the return shipping charges will be at the buyer’s expense.
Package Contents
Included Hardware & Tools
Note: Extra screws have been provided.
Tools Needed
Weight Capacity:
ASSEMBLY STEPS
- STEP 1 Install two Legs (A) onto Long Crossbar (C) using M8x42mm Screws (S-A) and 5mm Allen Wrench (T-A).
- STEP 2 Install a Short Crossbar (D) to the side of the previously installed Leg (A), as shown below, using M8x42mm Screws (S-A) and 5mm Allen Wrench (T-A). Install a third Leg onto the end of the Short Crossbar using M8x42mm Screws and 5mm Allen Wrench.
- STEP 3 Install Long Crossbar with Control Panel (B) onto the frame assembly using M8x42mm Screws (S-A) and 5mm Allen Wrench (T-A). Install the remaining Leg (A) onto the end of the Long Crossbar with Control Panel using M8x42mm Screws and 5mm Allen Wrench
- STEP 4 Install the remaining Short Crossbar (D) onto the frame assembly using M8x42mm Screws (S-A) and 5mm Allen Wrench (T-A).
- STEP 5 Orient the Dark Walnut and Black Panels (E,F) as shown with the pilot holes facing up on all three panels. The Black Panel should be in the center. Insert Wooden Dowel (S-C) into the sides of Black Center Panel. Slide Dark Walnut Panels over the Wooden Dowels towards Black Panel. Secure Panels using Connecting Plates (L), ST5x20mm Screws (S-B), and a Phillips screwdriver or Drill.
- STEP 6 Flip over the desktop and frame assembly and secure the Legs (A) to the assembled desktop using ST5x20mm Screws (S-B) and a Phillips screwdriver or Drill. Attach the Control Unit (G) and Power Adapter (H) to the underside of the desktop using ST5x20mm Screws and a Phillips screwdriver or drill.
- STEP 7
1. Connect Extensions Cables (N) to the cables from the legs further from the Control Unit (G).
2. Plug Power Cable (O) into Power Adapter (H).
3. Plug all of the cables into the Control Unit (G) as shown.
4. Remove the protective film from Cable Clips (M) and apply it to the underside of the desk to aid in cable management.
Remote Instructions
Pairing Remote to Desk
The Remote will need to be paired to the desk before using for the first time.
- Pairing: The desk will need to be unpluged for the beginning of the pairing process. Press and hold the button for 2 seconds, then plug the desk into a nearby outlet. The control panel will beep once to indicate pairing is successful.
- Unpair: To unpair the remote, begin by unplugging the desk from the wall. Press and hold the button, then plug the desk back into a nearby outlet. The control panel will beep once to indicate the remote has been unpaired.
Using Remote
Height Adjustment
- Press and hold the or buttons to raise or lower the desk. Release button when desk reaches the desired height.
- To return the lowest height setting, short press the button. The desk will begin retracting back to its lowest height.
Saving Height Settings
- To save a preferred height setting for easy recall, press and hold either the button for 3 seconds. The desk should emit a long beep, indicating that the memory setting has been saved successfully.
- To return desk to a saved height, press the corresponding button. The desk will automatically begin raising or lower to saved height.
Reset Mode
- To perform a desk rest, press and hold the button when the desk is in a stationary state. The desk will emit a long beep and then begin lowering. The desk will retract to it’s lowest setting and then rebound. The desk will will emit two beeps, indicating the desk has been successfully reset.
Control Panel Instructions
Using Controller
- Height Adjustment
- Press and hold either the or buttons to raise or lower the desk.
- Saving Height Settings
- To save a preferred height setting for easy recall, press the button and the screen will display S-.
- Then press any of the numbered buttons and the current height will be programmed to that button. The controller will emit two beeps to indicate that the height is saved.
- To return the desk to a saved height, press the corresponding button. The desk will automatically begin raising or lowering to the saved height. Press the corresponding button to cancel.
Reset Mode
- To perform a desk rest, press and hold the button until the desk reaches its lowest height, then release the button.
- Press and hold the button again. The desk will emit one beep and display rst, the desk will lower and bounce back a certain distance. The desk will emit two beeps, indicating the desk has been successfully reset
Child Lock Settings
- To Lock Desk: Simultaneously press and hold the AND button for 5 seconds until the screen displays LOC. This Control Panel has now been locked.
- To Unlock Desk: Simultaneously press and hold the AND button for 5 seconds until the screen switches from LOC to the displayed height. This Control Panel has now been unlocked.
Advanced Settings
To access custom desk settings, press and hold the button for 5 seconds until the screen flashes. Short press the button to select the desired setting. Use the or buttons to cycle through the value options, then long press the button to save the selection. A progress bar will be displayed and SUS will be displayed once the selection has been saved. If FAL if the change was unsuccessful. The screen will return to the displayed height if no selection is made after 10 seconds.
Troubleshooting
CHECK OUT OTHER GREAT PRODUCTS FROM
- EXPLORE MORE AT VIVO-US.COM. We offer a wide array of home & office products to fit your needs. From height adjustable desks to monitor mounts to keyboard trays and more!
WHO WE ARE
VIVO is more than a brand of ergonomic office furniture. We are a team of creative and innovative individuals working together to offer high-quality, affordable ergonomic solutions. We think and work outside of the box to serve you, our customer, to the best of our ability.
- Need Assistance? We Would Love to Help!
- Personable Customer Support | Mon-Fri 7 am-7pm
- We offer immediate assistance with rapid response times from customer service agents and product technicians to help you every step of the way!
CONTACT
- Call Us : 309-278-5303
- Average Resolution Time: 5m 4
- Chat Us: www.vivo-us.com.
- Average Resolution Time: < 15m
- Email Us: help@vivo-us.com.
- Average Resolution Time: 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within <2hr
- 92% within < 3hr
- LAST UPDATED: 04/29/24
- REV1
- Need Help? Get In Touch
- Monday-Friday from 7:00 am-7:00 pm CST
- help@vivo-us.com.
- www.vivo-us.com.
- Chat live with an agent!
- 309-278-5303
- FOR MORE GREAT VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM.
Black & Dark Walnut /Black 71” x 30” Quad Motor Electric 4-Leg Desk
- SKU: DESK-KIT-F10BD
- DESKTOP: DESK-TOP10BD
- FRAME: DESK-F10B
- Assembly Video & Product Info www.vivo-us.com/products/desk-kit-f10bd.
Contact Us First!
- DO NOT RETURN ITEMS DO NOT RETURN ITEMS!
- PERSONABLE CUSTOMER SUPPORT 7AM – 7 PM Monday-Friday
- Give us a Call: 309-278-5303
- Chat Us:www.vivo-us.com
- Email Us:help@vivo-us.com.
- We’re Here for You! Our customer-minded support team is here for YOU,
- Monday-Friday 7 am-7 pm CST. We offer immediate assistance with rapid response times from customer service agents and product technicians to help you every step of the way!
- Missing a Part?
- If any parts are received damaged / defective OR you are missing a part, please reach out to us within 30 days of product delivery to have it replaced at no cost.
- We are happy to replace parts to ensure you have a fully functioning product.
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more