ThermoWorks Pro Series 2.5 Inch High Temp Short Penetration Probe Instructions
- June 11, 2024
- ThermoWorks
Table of Contents
ThermoWorks Pro Series 2.5 Inch High Temp Short Penetration Probe
Product Usage Instructions
Cable Care:
- Avoid exposing the cable to flames, immersion in liquids, contact with racks or coals, and bending/kinking the cable.
Technical Support:
- For warranty, service, and technical assistance, contact ThermoWorks Technical Support at 385-330-0591 or via email at techsupport@thermoworks.com.
Compatibility:
- Use this probe only with ThermoWorks thermometers designed for the Pro-Series range. It is not compatible with other brands.
FAQ
Frequently Asked Questions
- Q: Can the probe be used with non-ThermoWorks thermometers?
- A: No, this probe is designed specifically for ThermoWorks thermometers from the Pro-Series line and will not work with other brands.
- Q: What is the maximum temperature the cable can withstand?
- A: The maximum temperature the cable can handle is specified as per the product specifications provided.
- Q: How should I clean the probe?
- A: Clean the probe gently with a damp cloth or mild soapy water. Do not submerge the entire probe in water or use abrasive cleaners.
Designed for use in commercial kitchens and professional settings, the Pro- Series Probes deliver better accuracy, faster readings, unique designs, wider temperature ranges and better moisture resistance than probes sold with low- cost houseware-grade temperature alarms.
Information Instructions And Precautions
Instructions, Tips and Cautions
- The cable may be closed in an oven door or under a BBQ hood using the precautions below.
- Do not pull on the cable. Use the molded mini-handle.
- The cable will withstand 700°F (370°C) for short periods.
- Probe tip itself is rated to 572°F (300°C). Do NOT expose probe tip to flames or coals.
- Construction is moisture-resistant but do not immerse.
- Keep the probe cable away from oven elements, flames, coals, grill or oven racks—all of which can reach temperatures far higher than 700°F (even if an oven is set lower). The probe cable can be damaged at higher temperatures. The inner insulation will melt and the probe will short (displaying “NO PROBE”, LLL or HHH on the alarm display).
- Avoid repeated kinking or twisting of the probe cable which can break wires. To prolong the life of the probe, use a ThermoWorks Probe Spool.
- With care, the probe should last a long time. Eventually, you may need to replace it. If the probe becomes damaged, the base unit may flash “NO PROBE”, LLL or HHH above the temperature display.
CABLE SHOULD AVOID:
Specifications
- Cable Max Temp: 700ºF (370ºC)
- Transition Max Temp: 644ºF (340ºC)
- Probe Range: –58 to 572ºF (–50 to 300ºC)
- Cable Length: 47 inches (1.2m)
- Probe Length: 2.5 inches (63.5 mm)
Technical Support
- For warranty, service, and technical assistance, please contact ThermoWorks Technical Support at 385-330-0591 or email at techsupport@thermoworks.com.
- Use only with ThermoWorks thermometers designed for the Pro-Series. Will not work in other brands.
- For additional cooking tips and doneness temperatures, and to see the full line of ThermoWorks tools, visit our website at www.thermoworks.com.
Copyright by ThermoWorks, Inc. Content may not be used in whole or in part
without written consent.
ThermoWorks, the ThermoWorks logo and Pro-Series are registered trademarks of
ThermoWorks, Inc. All rights reserved.
Contact
ThermoWorks, Inc.
- Utah, U.S.A.
- Ph: 801-756-7705
- Fax: 801-756-8948
- www.thermoworks.com
Follow us on:
Designed in Utah.
Assembled in China.
TX-1009X-ST
Pro-Series High Temp Short Penetration Probe, 2.5″
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>