ThermoWorks TX-1614X-B1 12V Billows Battery Bank Instructions
- June 6, 2024
- ThermoWorks
Table of Contents
ThermoWorks TX-1614X-B1 12V Billows Battery Bank
Getting Started:
- Press to turn on battery.
- Output is used to power your instrument.
- Input is used to charge your battery.
- Recharge when only one red LED is visible.
- The red LEDs will flash during charging.
- The battery is fully charged when all red LEDs are solid.
- Turn off battery when not in use.
Recharge battery with 12-Volt AC Adapter TX-1012X-SA (included with Billows or sold separately.) Do not expose unit to temperatures above 113°F. When used in temperatures below 14°F, battery capacity will be diminished. Keep away from children. Dispose of properly after use by taking to an electronics recycling facility or drop off location. Billows Battery Bank is weather resistant. However, we recommend protecting it from extreme weather.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Meets ICES-003 Certificate requirements.
www.thermoworks.com
741 E. Utah Valley Dr.
American Fork, UT 84003
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>