ThermoWorks CR2032 DishTemp Blue Battery Instruction Manual
- June 6, 2024
- ThermoWorks
Table of Contents
DishTemp® & DishTemp® Blue Battery Installation Instructions
Remove the battery cover by undoing the three retaining screws and lifting
off.
Place the CR2032, 3-volt battery positive-side up, under the plastic and metal
tab at the top of the battery compartment, and press down.
Gently slide the battery so it is centered in the battery compartment.
The battery will stay in place without the battery cover when installed
properly.
Replace the battery cover and tighten screws. Be careful not to overtighten.
thermoworks.com
801-756-7705
techsupport@thermoworks.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>