collingwood V1 H2 Pro Extreme CSP Instruction Manual
- June 11, 2024
- COLLINGWOOD
Table of Contents
collingwood V1 H2 Pro Extreme CSP
Product Information
Specifications
- Model: H2 Pro Extreme CSP
- Power Supply: 220-240V AC 50/60Hz
- Minimum Air Gap: 10mm
- IP Rating: IP65
- Warranty: 4 years
Product Usage Instructions
-
Installation
Before installing the H2 Pro Extreme CSP, ensure a minimum air gap of 10mm. Connect the product to a mains power supply of 220-240V AC 50/60Hz. Follow the provided installation instructions in English, French, or Italian as needed. -
Disposal Guidelines
When disposing of the product, make sure to separate it from household waste. Recycle responsibly to promote sustainable reuse of material resources. Contact your local government office for information on environmentally safe recycling methods.
FAQ
-
Q: What should I do if I need assistance with installation?
A: If you require help with installation, contact our customer support at +44 (0) 1604 495 151 or email us at sales@collingwoodgroup.com for guidance. -
Q: How can I claim the warranty for the product?
A: To claim the 4-year warranty, please reach out to our customer service team at +44 (0) 1604 495 151 or refer to the warranty information provided with the product.
Installation
- Isolate the mains supply, before wiring.
- This unit must be wired by a qualified electrician or a suitable competent person.
- For wet areas, all connections must be suitably IP rated, eg. use Collingwood JB5.
- Rated voltage 220-240V AC.
- For better dimming performance, use dimmers which have been designed for electronic LED drivers, e.g.
- Collingwood DM298FP – Min 1, Max 10 units.
- V-COM 220W – Min 1, Max 26 units.
- Deltadore TYXIA 4940 – Min 1, max 10 units
- Hager EVN011 – Min 1, max 8 units.
- If in doubt, contact the dimmer manufacturer for advice. Quote the input power of 5W, and inrush current of 2.3A 0.06ms
- The above load advice is for guidance only. All installations must comply with the appropriate standards.
Installation data
- The light source contained in this luminaire shall only be replaced by the manufacturer his service agent or a similar qualified person.
- The driver contained in this luminaire shall only be replaced by the manufacturer or service agent or a similarly qualified person.
Specification
| Product | H2 Pro Extreme CSP |
|---|---|
| Input voltage | 220 – 240V AC 50/60Hz |
| Input current | 26mA |
| Input power | 5W |
| Power factor | >0.8 |
| Inrush current | 2.3A 0.06ms |
| Cutout | Ø 65-75mm |
Disposal
Disposal of this product should be separate from household waste. Please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resource. Household users should contact their local government office for details of where and how they can take these items for environmentally safe recycling.
Warranty
- 4-year warranty
Replaceable light source by a professional
Replaceable control gear by a professional
- Light source energy classes: D
Contact Information
en
- Add: Collingwood Lighting, Brooklands House, Sywell Aerodrome, Sywell, Northampton NN6 0BT, United Kingdom.
- t. +44 (0) 1604 495 151
- f. +44 (0) 1604 495 095
- e. sales@collingwoodgroup.com
- w. collingwoodlighting.com.
fr
- Indigo S.A. / N.V. Rue de la légende 32 G, 4141 Srimont – Belgique
- t. +32 (0)4 351 91 40
- e. info@indigo-lighting.com
- w. www.indigo-lighting.com.