Collingwood LSFA COF Dotless LED Strip Instruction Manual
- October 27, 2023
- COLLINGWOOD
Table of Contents
Collingwood LSFA COF Dotless LED Strip
Installation sequence
- Ensure the mounting surface is clean, dry and free from dust.
- Peel the protective backing from the reverse of the LED Strip.
- Carefully stick the strip to the mounting surface.
Note: Use in dry locations only.
Do not clean with water or any abrasive cleaners.
Power consumption = 8W per meter.
Wiring diagrams
24V DC LED driver
Multiple lengths up to driver capacity, see led drivers below
LED drivers
| Driver capacity (Watts) | 15W | 30W | **** 50W | **** 60W | **** 100W |
|---|---|---|---|---|---|
| Max total length (meters) | **** 1.8 | **** 3.7 | **** 6.2 | **** 7.5 |
**** 12.5
Disposal of this product should be separate from household waste. Please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resource. Household users should contact their local government office for details of where and how they can take these items for environmentally safe recycling.
3 year warranty
t +44 (0) 1604 495 151 f +44 (0) 1604 495 095 e
sales@collingwoodgroup.com w
collingwoodlighting.com Collingwood
Lighting, Brookland’s House, Sydell Aerodrome, Sydell, Northampton NN6 0BT,
United Kingdom
Installation instructions
Fast fit connector (LSFA07 only)
IMPORTANT: All connections must be + to + and – to – Insert COF strip and
connector cable into fast fix connector, crimp the connector using flat pliers
.
t +44 (0) 1604 495 151 f +44 (0) 1604 495 095 e sales@collingwoodgroup.com w collingwoodlighting.com Collingwood Lighting, Brookland’s House, Sydell Aerodrome, Sydell, Northampton NN6 0BT, United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>