ergodyne 6315 Trex Traction Devices User Guide

ergodyne 6315 Trex Traction Devices

Product Information

Specifications

• Brand: Ergodyne
• Model: Unspecified
• Material: Not specified
• Warranty: Lifetime warranty against defects in materials and workmanship

Product Usage Instructions

Putting on the Product:

1. Face forward and position the product correctly [fig 7].
2. Step down and pull the reflective elastic over your heel [fig 8].
3. Pull the top strap tight and secure it with the hook & loop fastener [fig 9].

Adjusting for Different Footwear:

1. If using over a shoe or boot, ensure a proper fit and secure the product [fig 11].
2. The mid-foot cleat can swivel onto the top of the boot or shoe with spikes facing up when walking indoors [fig 12].

FAQ (Frequently Asked Questions)

• What is the warranty coverage for this product?
  The product is covered by a lifetime warranty against defects in materials and workmanship for the original purchaser. Damage, abuse, and normal wear and tear are not covered.

• How can I contact Ergodyne for questions or support?
  You can reach Ergodyne at +1-651-642-9889 or 800-225-8238 during 8am-5 pm CST, or visit their website at www.ergodyne.com.

• Where can I find the product’s headquarters?
  The Intergalactic Headquarters of Ergodyne is located at 1021 Bandana Boulevard East, Suite 220, Saint Paul, MN 55108. You can also contact them at toll-free 800-225-8238 or internationally at +1 651-642-9889.

INSTRUCTION

TREX® MODELS 6300//6300TC//6304

1. Place over the toe of footwear with spikes facing out [fig 1].
2. Pull the tab on the back over the heel of the shoe or boot [fig 2].
3. Make sure you have a snug fit [fig 3].

TREX® MODELS 6310//6325//6326

1. Place over the toe of the footwear with spikes/pads facing out and pull the tab on the back over the heel of the shoe or boot [fig 4].
2. Tighten the cinch on top for a snug fit [figs 5 and 6].

TREX® MODEL 6315

1. Place toe through top strap with heel traction plate facing forward [fig 7].
2. Step down and pull reflective elastic over the heel [fig 8].
3. Pull the top strap tight and secure the hook & loop [fig 9].

TREX® MODELS 6316//6317

1. Place toe through top strap with spikes facing out [fig. 10].
2. Step down and pull the elastic webbing strap tight over the top of the shoe or boot [fig. 11].
3. The mid-foot cleat can swivel onto the top of the boot or shoe with spikes facing up when walking indoors [fig. 12].

LIMITED LIABILITY

TREX® is designed to enhance traction for walking on ice and packed snow, but will not eliminate the inherent risk of such conditions. When wearing TREX®, always use caution and reasonable care. Implied warranties of merchantability and fitness for a particular use are limited to this application only. The sole remedy for damages resulting from use of this product is the repair or replacement of defective parts. Ergodyne will not be liable for incidental or consequential damages.

WARRANTY

We stand behind everything we make and guarantee our products to be free of defects in materials and workmanship to the original purchaser for the lifetime of the product. Damage, abuse, and/or normal wear and tear are not covered. Questions? Call Ergodyneat +1-651-642-9889/ 800-225-8238 (8 am-5 pm CST) or www.ergodyne.com.

INTERGALACTIC HEADQUARTERS
1021 BANDANA BOULEVARD EAST // SUITE 220 // SAINT PAUL, MN 55108
TOLL-FREE 800 225 8238 // INT’L +1 651 642 9889 // ERGODYNE.COM
©2023 ERGODYNE. ALL RIGHTS RESERVED. ALL WRONGS REVERSED.
DESIGNED BY ERGODYNE IN MINNESOTA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>