BLACKSTONE 6228 Insulating Jacket For Drop In Griddles Owner’s Manual

Table of Contents

Assembly Instructions

Find a large, clean area to assemble your appliance. Remove all packing material before assembling.
Wear gloves due to sharp edges during assembly.
Place the inner base panel onto the outer base panel.
Attach the left inner panel to the base panel assembly using three (3) M6x15 screws.
Attach the right inner panel to the base panel assembly using three (3) M6x15 screws.
Attach the rear inner panel to the base panel assembly using four (4) M6x15 screws.
Attach the rear outer panel to the jacket base panel assembly using three (3) M6x15 screws.
Attach the left outer panel to the base panel assembly and rear panel assembly using four (4) M6x15 screws.
Attach the right outer panel to the base panel assembly and rear panel assembly using four (4) M6x15 screws.
Attach the left and right decorative plates to the inner panel assemblies using screws provided.
Place the silicone sleeve in the base panel.

Caution: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

CONTACT CUSTOMER SUPPORT BEFORE RETURNING THE APPLIANCE TO THE RETAILER.
THIS PRODUCT MAY BE COVERED BY ONE OR MORE ISSUED U.S. AND/OR INTERNATIONAL PATENTS AND MAY INCLUDE PATENT APPLICATIONS PENDING.
FOR MORE INFORMATION, PLEASE VISIT: BLACKSTONEPRODUCTS.COM/PATENTS
DISTRIBUTED BY NORTH ATLANTIC IMPORTS, LLC 1073 W 1700 N LOGAN, UT 84321 USA BLACKSTONE IS A REGISTERED TRADEMARK OF NORTH ATLANTIC IMPORTS, LLC
©2024 NORTH ATLANTIC IMPORTS. ALL RIGHTS RESERVED.

ASSEMBLY INSTRUCTION

CAUTION: Sharp edges. Wear gloves while assembling.

TOOL NEEDED

3 Phillips head screwdriver

Place the inner base panel onto the outer base panel.
Use three (3) M6x15 screws [a.] to attach the left inner panel to the base panel assembly.
Use three (3) M6x15 screws [a.] to attach the right inner panel to the base panel assembly.
Use four (4) M6x15 screws [a.] to attach the rear inner panel to the base panel assembly.
Use three (3) M6x15 screws [a.] to attach the rear outer panel to the jacket base panel assembly.
Use four (4) M6x15 screws [a.] to attach the left outer panel to the base panel assembly and rear panel assembly.
Use four (4) M6x15 screws [a.] to attach the right outer panel to the base panel assembly and rear panel assembly.
Use five (5) M6x15 screws [a.] to attach the left decorative plate 2 (long one) to the left inner panel assembly.
Use two (2) M6x15 countersunk screws [b.] to attach the left decora-tive plate 1 (short one) to the left inner panel assembly.
Use five (5) M6x15 screws [a.] to attach the right decorative plate 2 (long one) to the right inner panel assembly.
Use two (2) M6x15 countersunk screws [b.] to attach the right decorative plate 1 (short one) to the right inner panel assembly.
Use four (4) M6x15 screws [a.] to attach the rear decorative plate to the rear inner panel assembly.
Place the silicone sleeve in the base panel.
Please reference your Drop-In Griddle Owner’s Manual for installation instructions.

Q: Do I need any special tools for assembling the insulating jacket?
- A: The only tool required for assembly is a #3 Phillips head screwdriver. Ensure you have it before starting the assembly process.
Q: Are there any precautions I should take while assembling the insulating jacket?
- A: Yes, please wear gloves during assembly to avoid any injuries from sharp edges on the components.
Q: Where can I find more information about the product’s patents and support?
- A: For more information on patents and customer support, visit blackstoneproducts.com/patents and blackstoneproducts.com/support respectively.