Alza H4824 Wowitoys Cicada 2.4G Quadcopter Instruction Manual

: June 9, 2024
: alza

INSTRUCTIONS FOR USE

H4824

DISCLAIMER & WARNINGS

Please read this disclaimer, warnings and safety guidelines carefully before using our product. This product is not recommended for people under the age of 14. By using this product, you hereby agree to this disclaimer and signify that you have read it fully. You agree that you are responsible for your own conduct and any damage caused while using this product, and its consequences. You agree to use this product only for purposes that are proper and in accordance with local regulations, terms and all applicable polices and guidelines we may make available.
When using this product, please be sure to strictly abide by the specification requirements and safety guidelines stated in this document. Any personal injury property damage, legal disputes and all other adverse events caused by the violation of the safety instructions or due to any other factor, will not be our responsibility

WARNINGS

The drone is designed for age 14+.
Adult supervision is always advisable with any from of flying toy.
Always ensure your flight area is free of any obstacle before taking off, and ensure the drone is always flown in excess of 1.5 meters from yourself and others.
Remove all batteries from the drone and transmitter when not in use.
Never overcharge battery.
Never leave to charge battery unattended.
Never touch the drone’s motors during or after flight as they can get hot.
Never touch the propellers when they are in rotating.
If the drone becomes damaged, stop using it immediately.
Do not dispose of any parts of the drone or transmitter in the normal rubbish, all parts should be taken to your local recycling centre.
The battery in the drone should never be exposed to any form of high temperature or disposed in a fire.

SAFETY GUIDELINES

CHECK BEFORE USE

This product is not a toy, but a high precision drone that integrates various electronic stability and control mechanisms. Please be sure to set up this drone carefully and correctly to ensure safe, accident-free operation.
Please be sure that the batteries of the drone and transmitter are clean, undamaged and have enough power.
Please be sure that all the propellers are undamaged and are installed in the right orientation.
Please do a thorough check of the product before each use. Check for firmness of the parts, any signs of cracks and wear of the propeller, battery power and effectiveness of the product until all the issues have been checked completely.

SAFE FLIGHT ENVIRONMENT

Make sure the surrounding area is free of any people, pets or other obstacles before you start to fly your drone.
Your drone is designed for indoor or outdoor use. However, it is not recommended to fly the drone indoor if there is a limited space, or outdoor if there is strong wind.
Keep a safe flight distance between you and the drone at all times.

USE OF BATTERY

Please ensure the batteries are fitted in the correct orientation as shown in the instruction manual.
Avoid short circuits by fitting the batteries incorrectly, and do not crush the batteries as this may cause the risk of an explosion.
Do not mix new and old batteries as this can lead to a poor performance of the product.
Dispose used batteries carefully.
Please keep dead batteries away from heat and fire.
If the device is not going to be used for a long time, remove batteries to prevent potential damage from battery leakage.
It is recommended to only use the original USB charging cable that comes with the drone to charge the battery.
Don’t connect the battery directly to wall outlets or car cigarette-lighter sockets.
Don’t attempt to disassemble or modify the battery in any way.
Don’t use the battery if it gives of an odor, generates heat, becomes discolored or deformed, or appears abnormal in any way. If the battery is in use or being charged, remove it from the device or charger immediately and discontinue use.

Notes: Please ensure the batteries for the drone and the transmitter
are fully charged before flight.

Li-Po Battery Disposal & Recycling

Waste Lithium-polymer batteries must not be placed with household trash. Please contact local environmental or waste agency or the supplier of your model or your nearest Li-Po battery recycling center.

MAINTENANCE

1. Clean the product after each use with a clean, soft cloth.
2. Avoid prolonged exposure to direct sunlight and avoid the buildup of heat on the drone or batteries.
3. This device is not waterproof and must not be submerged or subjected to water under any circumstance. Failure to keep the device completely dry will result in failure and permanent damage to the unit. Be aware that although it might be dry where you are, droplets of rain or mist from a river or waterfall could damage your drone where it is flying.
4. Frequently check the charging plug and other accessories for signs of damage. If any part of the device or cables is damaged, avoid the use or charging until the device can be serviced.

PACKING LIST

Drone

Transmitter

Drone Battery

USB Charger

Propellers

Protective Rings

Screwdriver

User Manua

DRONE’S DETAILS

It is crucial that all the propellers are installed in the correct position (Pay attention to the letter A or B printed underneath each propeller).

Foldable

TRANSMITTER FUNCTIONS

JOYSTICK MODE

Left Joystick

Right Joystick

INSTALLATION

PROTECTIVE RINGS

Installation: Align the protective guard with the bottom of the motor and press it into place.

WARNING

Note: Operators are strongly advised to install protective rings before
flight. It can protect the safety of the drone propellers and the motors.

DRONE BATTERY

Installation: Push the battery correctly into the drone battery compartment. Make sure that you hear a click sound indicating the battery is firmly installed.

Removal: Press the lock button on the battery and pull it back to remove the battery from the compartment.

The battery should be installed firmly, failure to do it may affect the flight safety of your drone.

PROPELLERS

Installation: As shown above, connect each propeller to its corresponding motor shaft, either position “A/B”, then lock the propeller to the motor shaft.

Removal: Use a screwdriver (provided) to remove propellers in counter- clockwise.

Attention: Pay attention to the “A” or “B” is printed on each propeller. The drone will not fly unless the correct propeller is installed on the correct motor shaft.

PHONE HOLDER

Pull the back cover out and install and remove the phone holder as
shown above.

TRANSMITTER BATTERY

4 x AAA batteries (not included)

Always use alkaline batteries, never mix old and new batteries.

Unscrew the battery cover, press and slide the battery cover out, and insert 4 x AAA batteries(not included), make sure to insert them following the correct polarity as shown.
Re-attach the battery cover.

CHARGING

DRONE BATTERY

Remove the battery from the drone and insert the charging wire into the battery charging slot.
Connect the USB charging cable with a power bank or a USB adapter (5V/2.0A) for charging.
When the battery is charging, the USB indicator will glow red.
The red light will go out when the battery is fully charged.

WARNING

Before charging, please read the instruction of the “2.3 Use of
Battery” section of the “Safety Guidelines” carefully!

OPERATION GUIDE

PAIRING

(1).Toggle the power switch of the remote control to the right to turn on the remote control, at the same time the remote control will make a beep, and the power indicator of the remote control will flash.

(2). Long press the power button to turn on the drone, the indicator lights on the drone will flash.

(3). Place the drone on a flat and level surface with the head forward and the tail facing towards the operator.

(4). Slowly push the left joystick of the transmitter up to the top and transmitter will beep once and then pull down to the bottom and transmitter will beep once again. After pairing, the power indicator of the remote control will be solid, and the LED lights of the drone will appear “flickering”.

Download APP

For iPhone users, scan the QR Code on the packaging or below, or go into Apple store and search for “WOWITOYS”, to download the software; For Android smartphone users, scan the QR Code on the packaging or below, or go into Android Eloquent Market / Google play and search for “WOWITOYS”, to download the software.

WOWITOYS

CONNECT TO THE APP

Connect your smartphone to the WiFi network created by the drone.
To check the drone’s status in the “WOWITOYS” APP.

Open your phone’s Wi-Fi settings and click Wi-Fi to search for the Wi-Fi of the drone.
Select the Wi-Fi network: H4824-**.
Wait for a couple of seconds for your phone to connect to the drone’s Wi-Fi.
Open the “WOWITOYS” application.
Choose corresponding drone and click “ GO ” button to enter the operation interface of the APP.

WARNING

If app does not display images after connecting to the drone’s WIFI,
please turn off the local (3G/4G/5G) network of the smartphone firstly.

CALIBRATING THE GYRO

If you are experiencing issues controlling the drone & it is not responding correctly to the controller, it can be reset by following steps :

Turn on the drone & controller, place the drone on a flat ground (it is very important), then push the left throttle of the controller up &down once to pair with the drone.
Then push both left & right throttle of the controller to the left-down corner (7 o’clock direction). This will reset the drone to its original factory settings & will be ready to fly again.

TAKING-OFF / LANDING METHOD

Method 1: Short press the one key take-off/land button “ ”, the drone will automatically take off and hover at an altitude about 1.2 meter.
Short press the one key take-off/land button “ ” again, the drone
will land slowly until landing.

Method 2: Push the left joystick up until the propellers of drone rotate without taking off and then push up the left joystick again to take off. Pull the left joystick down until landing.

FUNCTION DETAILS

LED ON/OFF

Press the LED button to turn off/on the lights

EMERGENCY STOP

Long press the emergency stop button on the transmitter, the motors will stop rotating immediately.

WARNING

Only stop motors mid-flight in an emergency situation, doing so to reduce the risk of damage or injury

TRIMMING

lf the drone is away in an unprompted direction, use the trim buttons to correct the flight:

1- Forward Trim
2- Backward Trim
3- Left Trim
4- Right Trim

HRADLESS MODE

To activate headless mode, short press “headless” button, the indicator lights on drone will flash, and the drone will fly in the desired selected direction, regardless of the direction the drone is facing.

Press the headless button again to exit headless mode.

SPEED SWITCH

Press the speed switch button to switch high or low speed mode freely.

AUTO RETURN:

Short press the auto return button, the drone will automatically return in the direction of the tail before takeoff. (Most of all, operator must keep in mind the drone orientation before the drone takes off, otherwise the return direction of the drone will deviate.)

360 FLIPS

Perform 360 flips by pressing the “flip” button and immediately
operate the right joystick in the desired direction.

APP OPERATION INSTRUCTION

Emergency lock function
When you find the drone is very near to the people or obstacles during flying, you could press the button to cut off the signal then to stop drone’s flying immediately, to avoid crashes to the people or obstacles. You could turn on the drone to enjoy the flying again as usual.

Customer Service:

www.wowitoys.com

service@wowitoys.com

www.alza.co.uk/kontakt

+44 (0) 203 514 4411

Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

DECLARATION OF CONFORMITY

This product complies with the following European Union Directives and is therefore eligible for sale in EU countries: Directive 2014/53/EU, Directive 2011/65/EU as amended by 2015/863/EU.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

WARRANTY CONDITIONS

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this
voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of nonoriginal components.