SPON AH-906H Wireless Headphone User Manual
- October 27, 2023
- SPON
Table of Contents
SPON AH-906H Wireless Headphone
Features
Specifications
Basic Info.
- Bluetooth Version:V5.2
- Model: AH-906H
- Support: HFP.HSPAVRCP AND A2DP
- Effective Distance: 1Ometer open space
- Music: 18 Hours
- Calling: 24 Hours
- Standby: 300 Hours
- Charging: 2 Hours
- Battery: Polymer
- Function:Answering phone call, hang up,.reject,volume adjustment,previous and next change,line in etc
Power on/off and bluetooth pairing
- Press” ” for 2 seconds when power off, then blue light sparkling meanwhile voice tips of Power On,it means power on. In another way said.press Irfor 3 seconds when power on, then the earphone indicator is go out,it means power of.
- 3 seconds after power on ,when red and blue light alternates, then it’s going the step or pairing.
Connect Earphone
- Turn on the bluetooth earphone and set the mode to pair function to standby
- Turn on your mobile bluetooth function and start to search until findd
- Phone and the bluetooth earphone are connected successfully when you hear the voice tips of “Connected
- The bluetooth earphone will poôver off if 5 Minutes no any operations after connected.
Answering Call
Press one time” ” to answer phone call
Hang up Call
Press one time” ” after finishing callingg
Reject Call
Press ” “and hold for 2 seconds
Volume Adjustment
- This means volume up, ( ) this means volume down, total 15 grades, Set in the model of playing music
- You will hear a voice of “DU” when you set the max or min volume
- We don’ tsuggest to set max volume when you use for long time, it may hurt your hearing
Power on/off and bluetooth pairing
Quick click ” ” this button,can call the last one in your calling list
Music
Play, Pause: Press “ ” one time to play and press again to pause in standby
mode
Prev. & Next: Press” ” and hold for 2 seconds then play the previous song.
press “ “and hold for 2 seconds then play the next song
Line in
Plug the aux cable to the earphone and another port to audio device when power
off,then it can use as a normal cable earphone
Language switching
Matching state(red,and blue lights flashing), at the same time short press
previous song “ “, and the next song “ “, after the reboot to switch to
ahother voice prompt,is two kindsS of voice prompt in English and Chinese.
Charging
- Charging with computer of directly to the charger with usb cable
- Red light means charging
- Blue light means fully charged
- Please full charged at the first time and then power off after finish.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction