Schlage Custom Dummy Handleset FC170/FC172 Installation Manual
- June 8, 2024
- Schlage
Table of Contents
Installation Instructions
P518-150
Model FC170/172, Dummy
a. Lever
b. Trim
c. Chassis
d. Chassis screws
e. Allen wrench (Do not discard!)
1 Determine the location.
1a Measure the location of other knobs/levers in the house.
1b Mark these measurements on the dummy door.
2 Install the chassis.
Screws are self-drilling. Do not pre-drill.
3 Install the trim.
4 Install the knob/lever.
4a Push knob/lever into place.
4b Then tighten set screw.
5 Repeat all steps for other side of door if necessary.
© Allegion 2017
Printed in U.S.A.
P518-150 Rev. 08/17-a
Schlage Custom Dummy Handleset FC170/FC172 Installation Manual – Optimized
PDF
Schlage Custom Dummy Handleset FC170/FC172 Installation Manual – Original
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>