SCHLAGE XE360 Series Satin Nickel LAT 619 Standard Cylindrical Instructions
- June 2, 2024
- Schlage
Table of Contents
SCHLAGE XE360 Series Satin Nickel LAT 619 Standard Cylindrical
Product Information
Specifications
- Model: XE360-Series
- Models Available: XE360-EW, XF25
- Door Type: Wood, flat or beveled
- Door Thickness: 1 3/4″ (44 mm)
- Faceplate: Not applicable (n/a)
- Backsets: Varies
Product Usage Instructions
Door Installation
- Jamb (Interior – push side): 21/32″ (17 mm), 1/8″ (3 mm) deep
- Jamb (Exterior – pull side): 7 7/8″ (200 mm), 13/16″ (21 mm) backset
- Door Edge: 3/4″ (19 mm), 3/8″ (10 mm) deep
- Lock Dimensions: 7/8″ (22 mm) faceplate, 2 1/8″ (29 mm) backset
Door Preparation Template
Use template XE105 for door preparation.
FAQs
Q: What should I do if the backset varies?
- A: Adjust the door preparation accordingly to accommodate the varying backset measurements.
Q: Is the faceplate included with the lock?
- A: No, the faceplate does not apply to this model.
Dimension
- Door Type: Wood, flat or beveled
- Door Thickness: 1 3/4″ (44 mm)
- Faceplate: n/a
- Backsets: Varies
- Dimensions shown in parentheses () are in millimeters.
- Drawing not to scale.
- © 2024 Allegion
- XE105 Rev. 01/24
- www.allegion.com/us
Documents / Resources
|
SCHLAGE XE360 Series Satin Nickel LAT 619 Standard
Cylindrical
[pdf] Instructions
XE360 Series Satin Nickel LAT 619 Standard Cylindrical, XE360, Series Satin
Nickel LAT 619 Standard Cylindrical, Nickel LAT 619 Standard Cylindrical, 619
Standard Cylindrical, Standard Cylindrical
---|---
|
SCHLAGE XE360 Series Satin Nickel LAT 619 Standard
Cylindrical
[pdf] Owner's Manual
XE360 Series Satin Nickel LAT 619 Standard Cylindrical, XE360 Series, Satin
Nickel LAT 619 Standard Cylindrical, 619 Standard Cylindrical, Standard
Cylindrical
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>