Shenzhen Zdy Technology B35 S Helmet Bluetooth Headset User Manual

Shenzhen Zdy Technology B35 S Helmet Bluetooth Headset

PRODUCT INTRODUCTION

In order to make riding safer and easier, the B35S Bluetooth helmet headset is designed for taking phone calls and listening to music or navigation while riding. The advanced CSR Bluetooth chipset and the integrated headphone amplifier provide a better audio experience regardless of use type. The delicate,small, and water-proof design makes the B35S an amazing riding companion.

PRODUCT PARAMETERS

• Bluetooth Chipset Version: EDR Bluetooth CSR 8635
• Frequency: 2. 4GHz
• Bluetooth Profile: A2DP and AVRCP
• Amplifier: HT4832SQ
• Battery Capacity: 950mAh
• Working Duration: ~40 hours
• Charging Voltage: DC 5V/210mA
• Maximum Mobile Phone Distance: 10 m/30ft

ITEMS INCLUDED

BUTTON FUNCTIONS

• Long press for 2 seconds to boot the device. If there is no available Bluetooth device, the B35S will automatically enter pairing mode. The red and blue LED lights flash alternately. If there is a previously connected device, the B35S will automatically connect.

• Long press for 3 seconds to shut down device after the power is on.

• Long press for 1 second to start Siri for iOS and Google and receiver and both are within an effective distance for better Assistant for Android devices.

• Double-click the power button when the headset is power on BUT a Bluetooth device is NOT connected in order to change the B35S device language.

• Short press the plus button for volume increase.

• Long press the plus button to change to the next song.

• Short press minus button for volume decrease.

• Long press the minus button for the last song.

When In Standby/Listening to Music/Listening to Navigation

• Short press the multi-function button to play and pause music.

• Long press the multi-function button to redial the last outgoing call.
  Incoming Call

• The B35S will automatically answer the incoming calls if no input is given within in 10 seconds.

• Long press the multi-function button for 2 seconds to reject an incoming call.

• Short press the multi-function button to answer an incoming call.
  Calling

• Short press the multi-function button to hang up after calling.

FUNCTIONAL OPERATION

• Boot: Long press” “button for 2 seconds.
• Shut Down: Long press” “button for 3 seconds.
• First Time Paring:

1.  **Step 1:** Long press” “button for 2 seconds to boot the device and wait for the red and blue LED lights flash alternately.
2.  **Step 2:** Open the mobile device Bluetooth list, select “B35S” and and connect. Once connected, only the blue LED light will flash.

• Automatic Paring: Open the Bluetooth settings page of the last connected phone. Long press the” ” button for 2 seconds to boot the B35S, then the device and Bluetooth phone will automatically be paired within 15 seconds as indicated by the blue LED light slowly flashing.
• Automatic Power Off: If the device has no previous connections with any nearby Bluetooth devices for 5 minutes, it will automatically power off.

BATTERY CHARGING

• Connect the device to your PC USB or any USB charge socket to charge the battery.
• The red LED light indicates that the unit is charging.
• When charging is completed, the red LED light will turn blue.

HARDWARE RESET
Charge the device if the system has any issues.

HOW TO MOUNT THE HEADSET

1. Mounting headset device on the helmet.
   Main Method: Use the provided mounting clip to find a suitable position on the edge of the helmet and clamp the mounting clip to the helmet.
   Alternate Method: You can use Velcro to mount the device on the edge of the helmet.

2. To attach the ear speaker and microphone arm to the inside of the helmet. Take the Velcro pads which the speaker will attach to and test the best position for placement. The Velcro pad should be fixed at the height of your ear within the helmet’s speaker cutouts. You will need to put the helmet on a few times to find the optimum position to apply the pad. When the correct positioning is found, remove the protective strip and apply the Velcro pads to the inside of the helmet.

3. Take the ear speaker and stick it to the Velcro pad. Run the microphone arm down and around to where your mouth will be. The microphone arm is flexible so you can adjust it so that it sits in the optimum position in front of your mouth. Some helmets have removable padding, if yours does, it is recommended to put the speaker and microphone under the padding.

4. Insert the headphone plug into the headphone jack on the device and make sure it is firmly in place, otherwise the quality of the sound will be affected and calling may not be possible.

5. Secure the cord with the headset plug inside the helmet. Tuck any extra lengths of wire into the helmet as well. Ensure that only few centimeters (or an inch) of the cord slack sticks out.

COMMON FAULTS AND SOLUTIONS

1. Prevent water from getting into the internal circuits. Short circuits resulting from water damage will break the device.
2. Do not open the device. Doing so will void your warranty.
3. Please use the product accessories charging cable to connect the corresponding charger.
4. Make sure that there are no obstacles between the transmitter and receiver and both are within an effective distance for better signal.

Warnings:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be u sed in portable exposure condition without restriction

Warranty Card

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>